@Article{, title={Investigation Biosorption Potential of Copper and Lead from Industrial Waste-Water Using Orange and Lemon Peels}, author={Z.A. Husoon and M.N.A. Al-Azzawi and S.A.K. Al-Hiyaly}, journal={Al-Nahrain Journal of Science مجلة النهرين للعلوم}, volume={16}, number={2}, pages={173-179}, year={2013}, abstract={Much attention has been made towards adsorbent materials to be used in heavy metal removal from polluted water and various techniques are applied such as chemical, physical and biological techniques. This study was designed for using less expensive and much frequently available materials (orange & lemon peels) to remove copper and lead from industrial waste-water. Three forms of these peels (fresh dried small pieces and powder) were used. Also other factors such as pH and temperature were examined for probable effects on biosorption. Current data show that both orange and lemon peels are capable of removing copper and lead ions at significant capacity. Furthermore, lemon peels had higher capability than orange peels and the form of peel powder of both orange and lemon showed higher capacity than fresh and dried pieces where lemon powder has shown biosorption capacity of 72.5% and 71.3% for lead and copper respectively while orange powder had bioremoval percentage of 56.7% of lead and 34.5% for copper. In case of fresh lemon peels, these figures were 70.9% for lead and 62.2% for copper but fresh orange peels gave much less percentage (48.7of lead and 29.6% of copper). Regarding dried peels which showed the lowest values, but again, lemon peels were significantly better than those of orange. These values of lemon were 58.0% for lead and 57.1% for copper but for orange peels, the biosorption percentages reached 37.2% and 23.7% for lead and copper respectively. However, biosorption capacity of both fruit peels at different forms were significantly affected by various levels of both pH and temperature. The optimum pH and temperature values for better bioremoval capacity for all treatment within this study were 5 and 40 C° for pH and temperature respectively. Based on above, current data found that lemon peels are more efficient than the orange peels as biosorbents materials.

تم توجيهه الكثير من الاهتمام إلى الأنواع المختلفة من ألمازات لاستخدامها في امتزاز العناصر الثقيلة من مياه الفضلة الصناعية من خلال استخدام المتوفر من التقنيات الكيميائية و الفيزيائية و الإحيائية، صممت الدراسة الحالية لاستخدام مازات اقل تكلفة واكثر وفرة (قشور البرتقال والليمون) لازالة النحاس والرصاص من مياه الفضلة الصناعية وقد استعملت ثلاث صور من قشور كلا النباتين وهي قشور طرية، قشور جافة ومسحوق القشور. كذلك تم دراسة بعض العوامل المؤثر في عملية الامتزاز مثل الدالة الحامضية ودرجة الحرارة، اظهرت نتائج الدراسة الحالية بان قشور كل من البرتقال والليمون لها القابلية على امتزاز ايونات النحاس والرصاص. في ذات الوقت؛ اظهرت الدراسة ان قشور الليمون كانت افضل من قشور البرتقال ولجميع صور القشور وبشكل عام يلاحظ في كلا الحالتين أن مسحوق القشور كان الاكثر كفاءة حيث بلغت نسبة امتزاز الرصاص 72.5% ونسبة امتزاز النحاس كانت 71.3% في حالة قشور الليمون بينما في حالة قشور البرتقال كانت هذه القيم أقل حيث كانت 56.7% و 34.5% للرصاص والنحاس على التوالي. أما القشور الطرية فقد اظهرت قدرة امتزاز افضل من القشور الجافة لكلا النباتين حيث سجلت قشور الليمون معدل امتزاز للرصاص بلغ 70.9% و 62.2% لعنصر النحاس في حين اظهرت قشور البرتقال الطرية كفاءة اقل لتسجل معدلات امتزاز 48.7 و 29.6% لعنصري الرصاص والنحاس على التوالي. أما كفاءة القشور الجافة، فقد اظهرت أقل معدلات امتزاز لكلا النباتين في حالة قشور الليمون، كانت المعدلات 58.0% للرصاص و 57.1% للنحاس بينما قشور البرتقال الجافة امتزت معدل رصاص بلغ 37.2% ومعدل نحاس وصل الى 23.7%. كذلك اظهرت الدراسة ان عملية امتزاز كلا العنصرين بقشور كلا النباتين تأثرت معنويا بالدالة الحامضية ودرجات الحرارة حيث تبين ان افضل قيمة للدالة الحامضية لتعطي اعلى معدل امتزاز هي 5 وكذلك الحال بالنسبة لدرجة الحرارة حيث تبين ان أنسب درجة هي 40° م، ويستنتج من الدراسة الحالية أن قشور الليمون هي أكثر كفاءة من قشور البرتقال كمازات حيوية.} }