@Article{, title={Study of Some Mechanical Properties of Unsaturated Polyester Filled with the Seed Shells of Sunflower and Water-Melon}, author={Mohammed Razzaq Mohammed}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={21}, number={4}, pages={1270-1277}, year={2013}, abstract={It is very important reducing the cost in the modern industries also declining the pollution which represents a big harmfulness to the environment. These days, the waste materials were used increasingly in reinforcement and formation new materials, therefore this research came to use a waste material to create a composite material has good properties and use in different engineering applications. In this research, the effect of sunflower and water-melon seed shells powder on some mechanical properties of unsaturated polyester thermoset, that comprised each of bending modulus, flexural strength, impact strength, compressive strength and hardness were studied. The seed shells were collected and milled by electrical mill, the set of sieves were employed to get on seed shell powder by the suitable size. The seed shell powder was added to unsaturated polyester from 5 wt% to 25wt% and then bending, impact, compression and hardness tests were carried out for prepared specimens. The results showed that the flexural strength, modulus of elasticity, hardness and compressive strength increased with increasing of the shells powder percent. The flexural strength was (37.99 MPa) for pure unsaturated polyester, while was (45.26 MPa) at percent of powder (25 wt %). It was observed that the impact strength decreased with increasing of powder percent. The impact strength was (8.24 kJ/m2) for pure unsaturated polyester, while was (3.77 kJ/m2) at percent of water-melon seed shells powder 25 wt%.

يعتبر تقليل الكلفة في الصناعات الحديثة وكذلك تخفيض التلوث الذي يمثل خطراً كبيراً على البيئة أمر في غاية الأهمية. في الوقت الحالي، زاد استخدام مواد رخيصة في تقوية وتكوين مواد جديدة، ولذلك جاء هذا البحث بفكرة استخدام مواد مهملة وضارة للبيئة في تكوين مادة مركبة ذات خواص جيدة واستخدامها في التطبيقات الهندسية المختلفة. في هذا البحث تم دراسة تأثير إضافة مسحوق قشور بذور كل من عباد الشمس والرقي على بعض الخواص الميكانيكية للبولي أستر والتي شملت كل من معامل المرونة الانحنائي، مقاومة الانثناء، مقاومة الصدمة، مقاومة الانضغاط والصلادة. تم تجميع القشور وطحنها بطاحونة كهربائية وتم الحصول على مسحوق بالحجم الحبيبي المناسب عن طريق منظومة مناخل كهربائية اهتزازية. تم إضافة مسحوق القشور بنسب مختلفة تراوحت من (5% - 25%)wt بزيادة مقدارها 5%wt إلى البولي استر غير المشبع وتم إجراء فحص الانحناء، الصدمة،الانضغاط والصلادة للنماذج المحضرة، وقد وجد أنه بزيادة نسبة المسحوق تزداد كل من مقاومة الانثناء، مقاومة الانضغاط، معامل المرونة الانحنائي والصلادة حيث بلغت مقاومة الانحناء (37.99 MPa) للبولي استر غير المشبع النقي في حين كانت 45.26 MPa)) عند نسبة مسحوق مقدارها 25 wt% . كذلك لوحظ إن قيم مقاومة الصدمة تقل بزيادة نسبة الإضافة فقد بلغت قيمة مقاومة الصدمة (8.24 kJ/m2) للبولي استر النقي في حين بلغت (3.77 kJ/m2) للبولي استر المضاف إليه مسحوق قشور بذور الرقي بنسبة 25%wt .} }