TY - JOUR ID - TI - Design and Implementation of Forward Link Channel CDMA2000-1x System Based on SDR Using FPGA AU - Hadi T. Ziboon AU - Alaa Y. Eisa PY - 2013 VL - 21 IS - 4 SP - 1313 EP - 1327 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper is proposed an enhancement for forward link channel of CDMA2000-1x system by using 32QAM and 64QAMbased on SDR technology by using FPGA. The Simulink HDL Coder has been used for converting the MATLAB-Simulink models to VHDL language. The verification of the generated VHDL code has been done using Altera- ModelSimprogram, while the synthesis reports and board programming files have been obtained using the Quartus IIprogram. System implementation has been done using FPGA technology with Altera Cyclone II boards. The implementation of the forward link channel by using Simulink HDL coder shows feasibility and flexibility in solving the problem of complex multiplication of complex spreading code also the practical results were closed to that obtained from ModelSimprogram. The results show that the forward link channel of CDMA2000 with 32QAM and 64QAM is a suitable technique to increase the data rate up to 2Mbps in the presence of AWGN and Rayleigh fading channel. However the results of simulation for forward link channel of CDMA2000 system shows improvement when using three levels of codes (LPNC, Walsh code and complex coding) within (0.5-3.2) dB in the presence of AWGN and Rayleigh fading channel. MATLAB (2009) is used for simulation of the proposed system in the presence of AWGN and Rayleigh fading channel

أقترح ھذا المنشور تحسين لقناة الوصلة الامامية لتقسيم الشفري لتعدد الوصولية (CDMA-2000) باستعمال تقنية التضمين المتعامد الكمي-32 (32-QAM) والتضمين المتعامد الكمي-64 (64-QAM) بالاعتماد على البرمجيات المعرفة راديويا (SDR) باستعمال مصفوفة البوابات المنطقية الواسعة (FPGA). تم استخدام مشفر لغة الكيان المادي الكتلي (Simulink HDL coder) لغرض تحويل (MATLAB-Simulink models) الىلغة (VHDL). تمت عملية التحقق من الكود باستخدام برنامج (ModelSim-Altera) اما نتائج البناء وعملية تحميل البيانات وملفات البرمجة تمت باستخدام برنامج (Quartus II). تم بناء النظام باستعمال تقنية مصفوفة البوابات المنطقية الواسعة (FPGA) معAltera Cyclone II board. بناء قناة الوصلة الامامية بواسطة استعمال مشفر لغة الكيان المادي الكتلي (Simulink HDL coder) الذي بين ملائمة ومرونة من خلال حل مشكلة الضرب المعقد لشفرة الانتشار المعقدة وكذلك كانت النتائج العملية مقاربة لما تم الحصول عليه من برنامج (ModelSim).اثبتت النتائج بانقناة الوصلة الامامية في التقسيم الشفري لتعدد الوصولية (CDMA-2000) مع (32-QAM) و (64-QAM) هي تقنية مناسبة لزيادة معدل سرعة نقل البيانات وبحدود (2Mbps) بوجود الضوضاء والخفوت. علىاية حال نتائج محاكاة قناة الوصلة الامامية لنظام التقسيم الشفري لتعدد الوصولية (CDMA-2000) بينت وجود تحسين بحدود (3.2-0.5) dB بوجود الضوضاء والخفوت عند استعمال ثلاث انواع من الشفرات (الشفرة الطويلة للضوضاء المزيفة (LPNC), شفرة Walshوالتشفير المركب).تما ستخدام برنامج(MATLAB - 2009) لمحاكات النظام المقترح بوجود الضوضاء والخفوت. ER -