TY - JOUR ID - TI - Synthesis and characterization of some 2-sulphanyl benzimidazole derivatives and study of effect as corrosion inhibitors for carbon steel in sulfuric acid solution تحضير وتشخيص بعض مشتقات السلفانيل بنزايميدازول ودراسة تأثيرها كمثبطات تآكل لحديد الفولاذ في محلول حامض الكبريتيك AU - Suaad M. H.Al-Majidi سعاد محمد حسين AU - Uday H. R.Al-Jeilawi عدي هادي رؤوف AU - Khulood A. S., Al-Saadie خلود عبد صالح PY - 2013 VL - 54 IS - 4 SP - 789 EP - 802 JO - Iraqi Journal of Science المجلة العراقية للعلوم SN - 00672904 23121637 AB - This research involves the synthesis of some sulphanyl benzimidazole derivatives (Ia-c), which were prepared from reaction of 2-mercaptobenzimidazole substituted benzyl halide, and structures were identified by spectral methods[FTIR, 1H-NMR and 13C-NMR].These compounds were investigated as corrosion inhibitors for carbon steel in 1M H2SO4 solution using weight loss, potentiostatic polarization methods; obtained results showed that the sulphanyl benzimidazole derivatives retard both cathodic and anodic reactions in acidic media, by virtue of adsorption on the carbon steel surface. This adsorption obeyed Langmuir’s adsorption isotherm. The inhibition efficiency of (Ia-c) ranging between (65-92) %. By using different Ib derivative concentration and temperature, the carbon steel corrosion rate was decreased with increasing Ib concentration and the highest inhibition efficiency reach to 92.8% by using 4.6×10-4 M Ib concentration at 308 K,the inhibition efficiency increases with increasing temperature ranging(308-338)K.

يتضمن البحث تحضير بعض مشتقات السلفانيل بنزايميدازول ( c-aI), حضرت من تفاعل 2- مركبتوبنزايميدازول مع هاليدات البنزايل المعوضة, وتم تشخيص التراكيب بواسطة الطرائق الطيفية (الأشعة تحت الحمراء والرنين النووي المغناطيسي لل 1H، 13C ) وقياس بعض الثوابت الفيزياوية .تمت دراسة تأثير المركبات المحضرة كمثبطات لتآكل حديد الفولاذ في محيط 1 مولاري حامض الكبريتيك باستخدام طريقتي فرق الوزن وقياس منحني الاستقطاب بالمجهاد الساكن. بينت النتائج ان مشتقات السلفانيل بنزايميدازول المحضرة قللت من سرعة التفاعل الانودي والكاثودي على حدّ سواء في المحيط الحامضي وان هذه الاعاقة ناتجة عن أمتزازها على سطح الفولاذ.وعملية الأمتزاز كانت تطيع متساويات الحرارة من نوع لانكماير.وصلت نسبة كفاءة التثبيط للسطح باستخدام المشتقات الثلاثة 92-65)) %.تمت دراسة تأثير تراكيز مختلفة من المشتق Ib ودرجات حرارة مختلفة وتبين ان زيادة تركيزه تؤدي الى زيادة كفاءة التثبيط ووصلت أعلى نسبة 92.8 % عند استخدام4.6× 10-4 مولاري عند درجة 308 كلفن وتزداد كفاءة التثبيط بزيادة درجات الحرارة (308-338) كلفن. ER -