TY - JOUR ID - TI - BehaviorOf Reinforced Concrete Beams with Openings in Shear Zone under Repeated Loading سلوك العتبات الخرسانية الحاوية على فتحات في منطقةالقص تحت تأثير الأحمال التكرارية- عربي AU - Dr. B. J. Al-Sulayfani أ.د.بيار جعفر السليفاني AU - F.A. Al-Hamdani فهد اكرم سعيد الحمداني PY - 2013 VL - 21 IS - 5 SP - 14 EP - 27 JO - AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين SN - 18130526 22201270 AB - Abstract The research aims at studying the structural behavior of R.C beams having openings (at the shear zone) under repeated loads. The experimental program includes testing 7 R.C beams of (200mm*350mm*2400mm).The beams were divided in to two groups, the 1st.group were used to find out the shape effect, while the 2nd. group was utilized to find out the effect of the opening size (two beams without openings, considered as a reference beams) group one consisted of three R.C beams either with circular openings (dia.150)mm or square opening (133*133)mm or rectangular opening (200*88)mm located in the middle of the shear zone. Group two, consisted of three R.C beams with variable sizes of circular openings ,that is , (100mm , 125mm , 150mm) diameter ..When the results were analyzed , it was noticed that the presence of openings in the beams caused a reduction in the R.C beams strength a mounting to a ratio between (14-50)%, and caused an increase in the deflection of (25.5-39.2)%(relative to the control beam without openings) depending on the shape and size of the opening. From the study of the shape effect, it was found that the beams with rectangular openings had a higher strength than the ones with square openings of (20.4)% and (38.77)% than those of circular openings.When testing three R.C beams with different circular openings , (100mm , 125mm , 150mm ) diameter , the results indicated ,that the beam of 150mm diameter opening suffered a reduction in strength of (50.5)% while the reduction was (23%)and (14%) for the beams with (125mm)diameter and (100mm) diameter respectively .

الخلاصة يهدف البحث إلى دراسة السلوك الإنشائي للعتبات الخراسانية المسلحة التي تحتوي على فتحات في وسط منطقة القص تحت تأثير الأحمال التكرارية.تضمن البرنامج العملي للدراسة الحالية فحص (7) عتبة خرسانية مسلحة بأبعادmm (200*350*2400) ومن ضمنها عتبة سيطرة بدون فتحات عدد (1).وقسمت هذه العتبات علىمجموعتين,)المجموعة الاولى )استخدمت لغرض معرفة تأثير شكل الفتحاتفي العتبات,أما المجموعة الثانية فقداستخدمت لمعرفة تأثير حجم الفتحاتفي العتبات الخرسانية المسلحة, المجموعة الاولى تتألف من ثلاث عتبات خرسانية ذات فتحات اما دائرية بقطر (150)mm او مربعة بابعادmm(133*133) او مستطيلة بابعادmm(200*88) وتكون في وسط منطقة القص, والمجموعة الثانية تتكون من ثلاث عتبات خرسانية مسلحة ذات فتحات دائرية متغايرة بالحجم وذلك لمعرفة تأثير التغير بالحجم في العتبات الخرسانية وهذه العتبات باقطارmm(100,125,150) على التوالي.وبعد تحليل النتائج لوحظ أن وجود الفتحات في العتبات الخرسانية قد سبب انحدارا في مقاومة العتبات الخرسانية بنسبة تتراوح بين (50-14)% وادى الى الزيادة في مقدار الاود بالنسبة لعتبة السيطرة (بدون فتحات) بنسبةتتراوح بين (25.5%-39.2) اعتمادا على شكل الفتحاتوحجمها,وعند دراسة تأثير الشكل وجد ان العتبات ذات الفتحات المستطيلة لها قابلية تحمل اعلى من قابلية تحمل العتبات ذات الفتحات المربعة بنسبة (20.4%) والدائرية بنسبة (38.77%) , ومن خلال استخدام ثلاث عتبات خرسانية ذات فتحات دائرية الشكل باقطارmm(150,125,100)لدراسة تاثير الحجم وجد ان مقدار النقصان في مقاومة القص للعتبة الدائرية بقطر mm(150) هي (50.5%) في حين مقدار النقصان للمقاومة للعتبة الدائرية بقطر mm(125)و ( (100 هي (%23)(14%) على التوالي ER -