TY - JOUR ID - TI - Correlation Between Some Physical Properties Of Glasscrete العلاقة بین بعض الخواص الفیزیائیة للكونكریت الزجاجي AU - Sabreen Ali Abed صابرين علي عبد AU - Besma Mohammed Fahad . بسمه محمد فهد AU - Mohamed Mosleh Salman محمد مصلح سلمان PY - 2013 VL - 17 IS - 4 SP - 233 EP - 249 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - Sheet glass waste can be advantageous in concrete making leads to greener environment .two different series were prepared to accomplish the scope of the study .The first series was prepared by partially substituting the fine aggregates (sand) with fine sheet glass waste (fine sheet glass is a waste glass sheet reduced in size into 2.36-4.75mm) .The substituting of sand in proportions of (10%,20%,30%,40%,50%)by fine sheet glass waste . The second series was prepared by partially substituting the coarse aggregate (gravel) with crushed glass sheet waste (crushed glass sheet is waste glass sheet crushed to size of 9-12mm) .The substituting of gravel in proportions of (10%,20%,30%,40%,50%) by crushed glass sheet waste . The effect of FGA & CGA on Workability ,Hardness , Density and VP of the concrete with fresh and hardened concrete tests were analyzed .The result of the study conducted ,FGA where determined to have a significant effect upon the workability of the concrete , hardness, density and UPV higher than to the effect of CGA reaction was determined to have a slightly reduction in all properties , the results also showed the better percent of substitution was 40% FGA as a replacement of sand and the better percent of substitution was 20% CGA as a replacement of gravel . This study was an environmental one in consideration to the fact that waste glass could be used in the concrete as fine and coarse aggregate without the need for a big cost or enormous energy.

تعتبر مخلفات الزجاج من المشاكل الحديثة المضره بالبيئة والتي بدأ التوجه بأستغلالها كمواد بديله في الصناعات الانشائية يتناول البحث أستخدم مخلفات الزجاج في تصنيع نماذج كونكريتية كبدائل تعويضية عن الرمل والحصى بصوره جزئية, لغرض الحصول على هدف البحث تم تحضير نوعين من الاضافات ,النوع الاول يتضمن اضافة جزئيه من الزجاج المطحون الى حجم 2.36-4.75 ملم لاستخدامه كبديل للرمل بنسبة (10% ,20%, 30%,40%,50%) اما النوع الثاني فيتضمن اضافة جزئيه للزجاج المكسر الى حجم 9-12ملم لاستخدامه كبديل للحصى بنسبة (10%,20%,30%,40%,50%) . ولقد تم تحليل تأثير الزجاج الناعم والزجاج الخشن على قابلية التشغيل ,الكثافة ,الصلادة و الموجات الفوق الصوتية للخرسانة الطرية والمتصلبة . أظهرت النتائج هناك تأثير واضح وجيد لاضافة الزجاج الناعم كبديل للرمل اعلى وافضل من تأثير الزجاج الخشن كبديل للحصى حيث اظهر استبداله انخفاض قليل في النتائج هذا بالنسبه لنوع الاضافه اما بالنسبه للنسب المضافه فقد اظهرت الاختبارات بأن اضافة 40% من الزجاج الناعم كبديل للرمل من افضل النسب اما بالنسبه للزجاج الخشن فتعتبر النسبه 20% من افضل نسب اضافة الزجاج الخشن كبديل للحصى . ومن الجدير بالذكر ان هذه الدراسة تهتم بالمحافظه على البيئه من خلال ادراك حقيقة إمكانية استخدام المخلفات الزجاجية في الصناعات الإنشائية بدون الحاجة إلى كلفة عاليه واستهلاك كبير للطاقة . ER -