TY - JOUR ID - TI - A Proposed Technique For Harmonic Reduction Of Three Phase Cascade Multilevel Inverter (Cmli) تقنية مقترحة للتخلص من التوافقيات لعاكس متتالي متعدد المستويات ثلاثي الأطوار AU - . Shatha karim Baqir شذى كريم باقر PY - 2013 VL - 17 IS - 5 SP - 1 EP - 19 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - Inverters are widely used in many applications & the object of using the inverter is produce ac voltage with controllable magnitude & frequency. But the inverters where found in both the industrial motor drive industry & in the emerging distributed power generation industry, since these were essentially the only source of three phase inverters in the power range of interest. There are many types of multilevel inverters (MLI), but the cascaded multilevel inverter (CMLI) is most the favorite one for industrial applications. The three phase (CMLI) is used with optimization technique to suppress specific low-order harmonics or minimize total harmonic content & then improvement system efficiency .This technique of pulse width modulation (PWM) based on Walsh function harmonic elimination method. In this technique the harmonic amplitude of the inverter output voltage can be expressed as functions of switching angles. Thus, the switching angles are optimized by solving linear algebraic equations instead of solving nonlinear transcendental equations. This technique is suitable for higher level of three phase cascade multilevel inverter (CMLI) where other existing methods fail to compute the switching angles due to more computational burden. For the number of output voltage levels where multiple solutions exist, the solutions where produce least total harmonic distortion (THD) in the output voltage is chosen. As compared with previous work, the decrease in the THD can be reduced to (3%) in case of the proposed technique. In this paper, significant decrease in THD is obtained by solving linear algebraic equations for switching angles with system is three phases instead of solving nonlinear transcendental equations for switching angles with system is single phase. The proposed technique is implemented on a three phase cascade multilevel inverter (CMLI). Simulation results are presented using ORCAD package.

تستخدم العاكسات على نطاق واسع في العديد من التطبيقات, الهدف من استخدام العاكس هو توليد فولتية متناوبة ذات مقدار وتردد يمكن التحكم بهما .هناك أنواع عديدة من عاكس متعدد المستويات ولكن العاكس المتتالي هو الأكثر استخداماً في التطبيقات الصناعية.العاكس المتتالي متعدد المستويات ثلاثي الأطوار استخدم في هذا البحث بتقنية تضمين عرض النبضة جديدة معتمدة على طريقة التخلص من التوافقيات باستخدام دالة والش .باستخدام هذه التقنية فان مقدار التوافقيات لفولتية خرج العاكس يمكن التعبير عنها كدوال لزوايا التشغيل. لذلك حيث يمكن تحسين حساب مقدار زوايا التشغيل ليكون بحل معادلات جبرية خطية بدلا من حل معادلات متسامية (transcendental)غير خطية.ان التقنية المستخدمة ملائمة لمستويات عديدة لعاكس متتالي متعدد المستويات ثلاثي الاطوار تصل الى (65) مستوي بينما اثبت التقنيات الأخرى عدم كفاءتها في حساب زوايا التشغيل لمثل هذه المستويات وذلك لزيادة عامل التشوه الكلي(THD) للفولتية الخارجة للعاكس.حيث تمت المقارنة مع دراسة سابقة بين النقصان في عامل التشوه الكلي(THD) يمكن ان يقل (3%) في حالة التقنية المقترحة. في هذا البحث تم الحصول على نقصان واضح في عامل التشوه الكلي(THD) بحل معادلات جبرية خطية لزوايا التشغيل مع منظومة ثلاثية الأطوار بدلا من حل معادلات متسامية (transcendental)غير خطية مع منظومة أحادية الطور. إن التقنية المقترحة استخدمت عاكس متتالي متعدد المستويات ثلاثي الاطوار. استخدمت نتائج المحاكاة الحقيبة ORCAD . require higherversion technology ER -