TY - JOUR ID - TI - Studying some of the Geotechnical Properties of Stabilized Iraqi Clayey Soils دراسة بعض الخواص الجيوتكنيكية لترب طينية عراقية محسنة AU - Ishraq Khudhair Abass PY - 2013 VL - 31 IS - 6 Part (A) Engineering SP - 1117 EP - 1130 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In many road construction projects, if weak soils exist, stabilization and improvement of their properties is necessary. The stabilization process aims at increasing the soil strength and reducing its permeability and compressibility. An experimental program was undertaken to study the effect of engineering properties of kaolin clayey soils ((the kaolin was supplied by the General Company of Geological Survey and Mining which originally obtains from Al-Dewiekhla near Aukashat district in the west of Iraq)) when blended with lime (L) and Silica Fume (SF). A series of laboratory experiments have been implemented for varieties of samples: 2.5%, 5.0%, 7.5% and 10.0% for (Lime) and 2.0%, 4.0% and 6.0% for(Silica Fume). These experiments are: consistency limits test, specific gravity test, compaction test, unconfined compression test and California bearing ratio test. For each test, the optimal quantity of Lime (L) and the optimal percentage of Lime Silica Fume (LSF) combination were determined. The results revealed that: the optimal percentage of LSF combination was attained at a (2.5%L+6.0%SF), which served as control in this study. This optimal percentage: decrease the liquid limit, plasticity index, specific gravity and maximum dry density; and raise the optimum moisture content, unconfined compressive strength and California bearing ratio. These results showed also, that the combination of LSF stabilization at (2.5% L+6.0% SF) is better than the optimal one which achieved by Lime alone: 2.5%L for plasticity index, 10.0%L for specific gravity, maximum dry density and optimum moisture content, 5.0%L for unconfined compression stress and 7.5%forCaliforniabearingratio. All of these results indicated that the engineering properties of clayey soils can be enhanced, by blending Lime and Silica Fume together.

في العديد من مشاريع تشييد الطرق،إذا ما وجدت تربة ضعيفة، فأن تثبيت وتحسين خواصها أمر ضروري. أن عملية التحسين تهدف إلى زيادة متانة التربة وتقليل النفاذية الانضغاطية. تم اعتماد برنامج تجريبي لدراسة تأثر الخواص الهندسية لتربة طين الكاؤلين ((زود طين الكاؤلين من قبل الشركة العامة للمسح الجيولوجي والتعدين حيث يجلب بالأصل من منطقه الدويخله بالقرب من عكاشات غرب العراق)) عند امتزاجها مع النورة ومادة أل (Silica Fume) وقد تم تنفيذ سلسلة من التجارب المعملية لعينات من التربة بإضافة النسب التالية من النورة: 2.5٪، 5.0 ٪، 7.5٪ و 10.0٪. ونسب أخرى من مادة أل (Silica Fume): 2.0٪، 4.0٪ و 6.0٪. التجارب هي : حدود قوام الطين، الكثافة النوعية, فحص الرص، فحص مقاومه الانضغاط غير المحصور واختبار نسبة تحمل كاليفورنيا . وتم تحديد الكمية المثلى من ألنورة والنسبة الأمثل للنورة ومادة أل (Silica Fume) معا. أظهرت النتائج ما يلي: تم تحقيق النسبة الأمثل من مزيج ألنورة وومادة أل( (Silica Fume تلك ألنسبه هي :2.5% نوره+6.0% مادة أل (Silica Fume)التي كانت بمثابة نسبه سيطرة في هذه الدراسة. هذه النسبة المثلى: قللت من قيم مؤشر اللدونة، الكثافة النوعية والكثافة الجافة القصوى. بينما أدت إلى زيادة محتوى الرطوبة الأمثل، ومقاومه الانضغاط غير المحصور و نسبة تحمل كاليفورنيا . وأظهرت هذه النتائج أيضاأن لمزيج ألنورة ومادة أل (Silica Fume)تأثير أفضل من أضافه ألنورة بمفردها . النسبة المثالية للنورة هي 2.5% لمؤشر اللدونة و10% للكثافة النوعية وللكثافة الجافة العظمى ومحتوى الرطوبة الأمثل .بينما كانت 5.0٪ لتحسين مقاومه الانضغاط غير المحصور و 7.5% نسبة تحمل كاليفورنيا . أشارت كل من هذه النتائج إلى أمكانيه تحسين الخواص الهندسية للتربة الطينية، عن طريق مزج ألنورة ومادة أل (Silica Fume)معا. ER -