@Article{, title={Finite Element Analysis of the Boom of Crane Loaded Statically التحليل بطريقة العناصر المحددة لذراع رافعة تلسكوبي تحت حمل ساكن}, author={Bakr Noori Khudhur}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={31}, number={9 Part (A) Engineering}, pages={1626-1639}, year={2013}, abstract={In this paper, the finite element analysis was carried out on boom of telescopic crane using ANSYS package software and the manual calculation as well as the analysis by the strength of materials procedure. The stress picture along the boom model was conducted under the maximum load carrying capacity. The stress developed at the interception of hydraulic rod with the first tube is higher than that developed along the rest of the boom. Moreover, the maximum deflection occurs at the boom head sheave. In order to investigate the accuracy of the results, a comparison between the two approaches and the exact obtained by the strength of materials procedure is carried out. Although the high capabilities of ANSYS software, the results are somewhat less accurate than that obtained by the manual calculations. Besides that, the results obtained by the finite element manual calculations are wholly similar to that of strength of materials procedure. Model taken for this paper is TADANO TR-350 XL 35-ton capacity.

في هذا البحث تم أجراء عملية تحليل للعناصر المحددة لذراع رافعة تلسكوبي (الذراع المتداخل) باستخدام برنامج إل وبواسطة الحساب اليدوي بالإضافة إلى التحليل بواسطة طريقة مقاومة المواد. تم الحصول على صورة توزيع الأجهادات على طول الذراع تحت تأثير الأحمال القصوى ولوحظ أن أعظم الأجهادات تركزت في منطقة التقاء الذراع الهيدروليكي مع ذراع الرافعة. وبينت الدراسة أن أعظم انحراف حصل عند النهاية القصوى للذراع. لضمان صحة النتائج تمت مقارنة النتائج التي تم الحصول عليها من طريقتي التحليل بالعناصر المحددة مع النتائج الحقيقية من طريقة مقاومة المواد. بالرغم من الإمكانيات الكبيرة للبرنامج ألا أن النتائج التي تم الحصول عليها بواسطة هذا البرنامج كانت أقل دقة نوعا ما من تلك الناتجة بطريقة الحساب اليدوي. إلى جانب ذلك فان النتائج من الحساب اليدوي لطريقة العناصر المحددة كانت متطابقة كليا مع طريقة مقاومة المواد.} }