@Article{, title={Electrochemical, thermodynamic and quantum chemical studies of thoron compound as new corrosion inhibitor for C-steel in Acidic Media دراسة الكتروكيميائية وثرموديناميكية وكيمياء الكم لمركب الثورون كمثبط تآكل جديد للفولاذ الكاربوني في اوساط حامضية}, author={Munther Abdul-Jaleel Mohammed-Ali منذر عبدالجليل محمدعلي and Alaa Ali Husain الاء علي حسين and Ekhlas Qanber Jasim اخلاص قنبر جاسم}, journal={University of Thi-Qar Journal of Science مجلة علوم ذي قار}, volume={4}, number={1}, pages={63-77}, year={2013}, abstract={The corrosion rates in the presence of thoron as a steel corrosion inhibitor in 1M HCl and 1M H2SO4, were measured by the weight loss method, potentiodynamic polarization measurements and quantum chemical calculations. The weight loss method was studied in different times (1-4 hr) and in the range of temperatures from 298 to 318 K. Results obtained revealed that thoron performed excellently as a corrosion inhibitor for C-steel in these acids media and its efficiency attains to 91.99% at 1x10-3M at 298 K, and by potentiodynamic polarization measurements its efficiency attains to 93.74% in the same conditions. The Langmuir adsorption isotherm was tested for their fit to the experimental data. The apparent activation energies, enthalpies and entropies of the dissolution process and the free energies and equilibrium constants for the adsorption process were determined and discussed. All the computed quantum chemical parameters are found to correlate well with experimental inhibition efficiencies of inhibitor.

تم قياس سرعة التآكل بوجود مركب الثورون كمثبط للتاكل للفولاذ الكاربوني في وسطين 1مولاري من كل من حامض الهيدروكلوريك وحامض الكبريتيك باستخدام طريقة الفقدان بالوزن وقياسات جهد الاستقطاب وحسابات كيمياء الكم. درست طريقة الفقدان بالوزن في ازمان (1-4 ساعات) ضمن مدى حراري 298- 318 كلفن. اشارت النتائج ان لمركب الثورون فعالية تثبيط ممتازة للفولاذ الكاربوني في هذه الوساط الحامضية حيث وصلت كفاءة التثبيط الى 91,99% بتركيز 1x10-3 مولاري وحرارة 298 كلفن. اما باستخدام قياسات جهد الاستقطاب فقد وصلت الكفاءة الى 93,74%. كما لوحظ ايضا، ان امتزاز الجزيئات على سطح المعدن يخضع لمعادلة امتزاز لانكماير. تم تعيين قيم الثوابت الثرموديناميكية، طاقة التنشيط وحرارة التفاعل والعشوائية لعملية ذوبان السبيكة وتم كذلك تعيين الطاقة الحرة وثوابت الاتزان لعملية الامتزاز، وتم مناقشة هذه النتائج. وجد هناك تناسق كبير بين القيم العملية لكفاءة التثبيط والقيم المحسوبة من كيمياء الكم.} }