@Article{, title={Synthesis, Characterization of Some Azo Dyes Derived From Sulfa Drugs and the Use of Them as Corrosion Inhibitors in 0.5M Hydrochloric Acid Solution تحضير بعض اصباغ الآزو المشتقة من ادوية السلفا وتشخيصها واستخدامها كمثبطات تآكل في محلول 0,5 مولاري من حامض الهايدروكلوريك}, author={Adnan Sultan Abdul-Nabi, Ekhlas Qanber Jasim عدنان سلطان عبدالنبي و اخلاص قنبرجاسم}, journal={Journal of Basrah Researches (Sciences) مجلة ابحاث البصرة ( العلميات)}, volume={39}, number={3A}, pages={82-106}, year={2013}, abstract={Three azo dyes derived from sulfa drugs and pyridoxal were synthesized. The prepared compounds were identified by CHNS analysis FT-IR and 1H-NMR spectroscopy. The prepared azo dyes were studied as corrosion inhibitors in 0.5M HCl solution by the weight loss and galvanostatic polarization techniques in the range of temperature 30, 40, 50 and 60oC. the results obtained revealed that A2 performed excellently as a corrosion inhibitor for C-steel in hydrochloric acid media and its efficiency attains 80% at 5x10-3M, time of 5hr and at 30oC. The efficiency of inhibitors was decreased as the temperature increases. The effect of temperature on the rate of corrosion in the absence and presence of these compounds was also studied. The Langmuir adsorption isotherm was tested for their fit to the experimental data. The apparent activation energies, Arrhenius constant, enthalpies and entropies of the dissolution process and the free energies and adsorption equilibrium constant for the adsorption process were determined and discussed. The fundamental thermodynamic functions were used to glean important information about A1, A2 and A3 inhibitory behavior.

تم تحضير ثلاث اصباغ آزوية مشتقة من ادوية السلفا والبيريدوكسال، شخصت المركبات المحضرة باستخدام التحليل العنصري الدقيق والاشعة تحت الحمراء وطيف الرنين النووي المغناطيسي البروتوني. استخدمت الصبغات المحضرة كمثبطات لتآكل الفولاذ الكاربوني في محلول 0,5 مولاري من حامض الهيدروكلوريك، حيث تم قياس سرعة التآكل بطريقتي الفقدان بالوزن ومنحنيات تافل بدرجات حرارية مختلفة (30، 40، 50، 60 )oم. اثبتت النتائج ان الصبغة المحضرة A2 تثبط عملية التاكل بكفاءة عالية تصل الى 80% بتركيز 5x10-3 مولاري وزمن 5 ساعات وحرارة 30oم. درس تأثير تغير درجة الحرارة على النسب المئوية لكفاءة تثبيط الصبغات المحضرة، حيث بينت النتائج ان النسبة المئوية لكفاءة التثبيط تقل بازدياد درجة الحرارة. كما لوحظ ايضا، ان امتزاز الجزيئات على سطح المعدن يخضع لمعادلة امتزاز لانكماير. درست الدوال الثرموديناميكية، طاقة التنشيط وثابت ارينياس وحرارة التفاعل والعشوائية والطاقة الحرة وثابت الاتزان لعملية الامتزاز وتم مناقشة النتائج. استخدم مبدأ الدوال الثرموديناميكية لاعطاء معلومات مهمة عن طبيعة تصرف المثبطات قيد الدراسة.} }