@Article{, title={Experimental And Numerical Study Of Buckling For Carburized Low Carbon Steel Columns دراسة عملية عددية لانبعاج أعمدة الفولاذ منخفض الكربون المكربن}, author={Mohamad K. Alwan محمد كشكول علوان and Naseem Sabah abrahim نسيم صباح ابراهيم}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={18}, number={2}, pages={133-145}, year={2014}, abstract={Experimental work and finite element techniques were used to analyze the tensile and buckling characteristics of carburized low carbon steel columns for different diameters.The back of carburization consists of hardwood charcoal mixed with barium carbonate as the energizer. The specimens were carburized using (30%) of energizers at temperature equal to (900ºC) for 5 five hours.The modulus of elasticity as measured experimentally was used in FEM (ANSYS) to calculate the buckling load. The results of the study showed that the Vickers micro hardness increased from (HV=210) to (HV=525), the tensile strength increased from (708 MPa) to (1065 MPa) and critical buckling load increased from (18.37 kN) to (19.6 kN) for d=8mm. Also critical buckling load increased from (5.8 kN) to (19.2 kN) as the diameter of the carburized low carbon steel column increased from 6mm to 8mm respectively for FEA analysis.

تضمنت الدراسة الجانب العملي و تقنية العناصر المحددة لتحليل الشد و الانبعاج للفولاذ المنخفض الكربون المكربن وبأقطار مختلفة للعمود.أن وسط الكربنة مكون من مسحوق الفحم النباتي مع كاربونات الباريوم كمادة منشطة.وأن العينات يتم كربنتها باستخدام نسبة (30%) من مادة التنشيط وعند درجة حرارة (900ºC) ولمدة خمسة ساعات.النتائج العملية لمعامل المرونة استخدمت في تقنية العناصر المحددة (برنامج انسيز).بينت النتائج أن الصلادة المجهرية للسطح المكربن تزداد من (HV=210) الى (HV=525) ومقاومة الشد تزداد من (708 MPa) الى (1065MPa) والحمل الحرج للانبعاج يزداد من (18.37 kN) الى (19.6 kN) بعد الكربنة للنتائج العملية لقطر 6mm. و كذلك يزداد الحمل الحرج من (5.8 kN) الى (19.2 kN) بزيادة قطر العمود من 6 mm الى 8mm على التوالي.} }