@Article{, title={Fe Analysis of Residual Stresses Induced by Spot Welding of Stainless Steel Type Aisi 316 التحليل بالعناصر المحددة للأجهادات المتبقية المتولدة من عملية اللحام النقطي للصلب المقاوم للصدأ نوع AISI316}, author={Ahmed N. Al-Khazraji and Samir A. Al-Rabii and Ali Hussein F. Al-Jelehawy}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={2 Part (A) Engineering}, pages={365-384}, year={2014}, abstract={Specimens of the as-received stainless steel type 316, according to AISI standard, in form of sheet with 1.5 mm thickness were first spot welded and thenshot peened to obtain the influence of shot peening process on the residual stresses induced by spot welding process. X-Ray Diffraction (XRD) method was used to measure the residual stresses. Also, a finite element method (FEM) was employed by ANSYS software version 11 to achieve the simulations for transient thermal analysis and residual stresses analysis in all cases. In addition, the temperature dependency of materials properties was used to assess its effects on the final residual stress results. A comparison showed a very good agreement between the experimental and the numerical results due to the total elimination of tensile residual stresses and creating the compressive type instead.
تم أجراء عملية اللحام النقطي لعينات في الحالة المستلمة للصلب المقاوم للصدأ نوع (316) وفقا" للمواصفة (AISI) بشكل صفائح وبسمك (1.5) ملم وتم بعد ذلك سفعها بالكريات لبيان تأثير عملية السفع على الاجهادات المتبقية المتولدة من عملية اللحام النقطي. أستخدمت طريقة حيود الاشعة السينية (XRD) لقياس الاجهادات المتبقية. تم تطبيق طريقة العناصر المحددة (FEM) أيضا" بأستخدام برنامج (ANSYS 11) لأنجاز المحاكاة لكل من التحليل الحراري الانتقالي وتحليل الاجهادات المتبقية في جميع الحالات. أضافة الى ذلك ، أستخدم تأثير درجة الحرارة على خواص المواد لتقيم تأثيرها على النتائج النهائية للأجهادات المتبقية. واظهرت المقارنة وجود توافق تام بين النتائج العملية والنظرية بسبب التخلص التام من الاجهادات المتبقية الشدية وتوليد أجهادات ضغطية بدلا" عنها.} }