@Article{, title={IEEE 802.15.4 ZigBee-Based Wireless Sensor Network in Medical Application استخدام معايير IEEE 802.15.4 وتكنلوجيا ZigBee في شبكات المتحسسات اللاسلكية للتطبيقات الطبية}, author={Sabbar Insaif Jassim صبار نصيف جاسم and Shayma Wail Nourildean شيماء وائل نور الدين}, journal={Iraqi Journal of Science المجلة العراقية للعلوم}, volume={53}, number={5}, pages={1055-1066}, year={2012}, abstract={As a new and promising technology, wireless sensor networks (WSN) plays an essential part in a large number of modern applications. Wireless Sensor Networks comprised of small, simple, and inexpensive wireless devices – the so-called sensor nodes. ZigBee technology provides the framework required to support wireless networks and fills the gap between the IEEE 802.11 WiFi and IEEE 802.15 Bluetooth standards in terms of transmission range and data rates. Generally ZigBee classified as a low-rate wireless personal area network (LR-WPAN) technology. This paper concerns with the use of WSN in one of many applications which it is patient monitoring. It performs patient monitoring system using ZigBee WSN. The modeled system consists of number of wards, each ward had number of sensors for each patient. Each sensor node represented with ZigBee end device that transmit the traffic to the master node which it is ZigBee coordinator. Then, The information can be accessed by the doctor by connecting the system through Ethernet LAN to the server. This simulation study was done using OPNET modeler V14.5. This paper study the performance of the modeled system in terms of delay, throughput, traffic received and other parameters that could be taken to study the performance of the modeled system if the number of patients was increased, the effect of increasing master nodes and the existence of router. The results showed that single coordinator (master node) system cause more delay, throughput than multiple coordinators system and the existence of router cause additional delay to the system. ZigBee based WSN for patient monitoring application resulted in online treatment, history as a database to lead the doctor in order to give proper instructions to the patient.

كتكنولوجيا جديدة وواعدة، شبكات الاستشعار اللاسلكية (WSN) تلعب دوراً أساسيا في عدد كبير من التطبيقات الحديثة. شبكات الاستشعار لاسلكية تتكون من أجهزة لاسلكية صغيرة وبسيطة وغير مكلفة- ما يسمى عقد الاستشعار. ان تكنولوجيا ZigBee يوفر الإطار اللازم لدعم الشبكات اللاسلكية ويسد الفجوة بين IEEE 802.11 ومعايير IEEE 802.15 البلوتوث من حيث نطاق الارسال و معدلات نقل البيانات. عموما تصنف الZigBee كشبكة اتصال شخصية لاسلكية منخفضة المعدل (LR-WPAN). هذا البحث يتعلق باستخدام شبكة الاستشعار اللاسلكية WSN في واحدة من العديد من التطبيقات التي هي مراقبة المرضى. انها تمثل نظام مراقبة المرضى باستخدام شبكة الاستشعار اللاسلكية المبنية باستخدام تكنولوجيا الZigBee. يتكون النظام من عدد من الأجنحة، كل جناح يتكون من عدد من أجهزة استشعار لكل مريض. كل عقده استشعار تتمثل بend device ZigBee الذي يرسل المرور الى العقدة الرئيسية الذي تتمثل بمنسق ZigBee. لاحقا يمكن الوصول إلى المعلومات من الطبيب عن طريق ربط النظام بواسطة Ethernet LAN إلى الخادم. وأجريت دراسة محاكاة هذا النظام استخدام OPNET modeler V14.5. هذا البحث درس أداء النظام النموذج من حيث التأخير وسرعة النقل وحركة المرور الواردة والمعلومات الأخرى التي يمكن اتخاذها من أجل دراسة أداء النظام النموذج في حالة إذا زاد عدد المرضى وأثر زيادة العقد الرئيسية ووجود الراوتر. النتائج اظهرت ان النظام مع عقدة رئيسية واحدة يسبب تاخير اضافي ونقل بيانات اكثر من النظام المتعدد العقد الرئيسة (منسق الزيجبي) ZigBee . ان شبكات الاستشعار اللاسلكية المبنية باستخدام الزيجبي في تطبيقات مراقبة المرضى تنتج عن معالجة مفتوحة وتاريخ يعتبر كقاعدة بيانات تقود الطبيب حتى يعطي الوصفات الصحيحة للمريض.} }