TY - JOUR ID - TI - Mechanical Behavior of Polyester and Fiber Glass as a Composite Material used in a Vehicle under Dynamic Loading السلوك الميكانيكي للبولستر والالياف الزجاجية كمواد مركبة استعملت في العربات تحت الاحمال الديناميكية AU - Ahmed Naif Al-Khazraji* Ali Yasser Hassan* Emad Abdul Hussein Abdul Sahib* PY - 2014 VL - 21 IS - 1 SP - 19 EP - 28 JO - Tikrit Journal of Engineering Sciences مجلة تكريت للعلوم الهندسية SN - 1813162X 23127589 AB - The automobile industry has shown increased interest in the replacement of steel spring with fiberglass composite leaf spring due to high strength compared to weight. The aim of this paper is to study two kinds of fiberglass, regular direction (0-90) and random direction immersed in polyester resin. They were tested under static load, as tensile test for their mechanical properties, and under dynamic load in fully reversible bending tests as fatigue test, to estimate S-N curves, and impact test for their mechanical properties. Results from the tensile tests showed that the tensile strength of the regular type is greater than random type. The fatigue test results showed that the number of cycles to failure in regular type of composite material is greater than that of the random type and the endurance limit is also greater than in random, the increase percentage in endurance limit is 7.5%. Results due to impact test showed that there were on increasing in fracture energy for the random type the increase ratio is 13.9%. The Important characteristics of composites that make them excellent for leaf spring instead of steel are higher strength-to-weight ratio, superior fatigue strength. Application of composite structures reduces the weight of leaf spring without any reduction on the load carrying capacity and stiffness in automobile suspension system.

اظهرت صناعة السيارات اهتماما متزايدا بابدال النوابض الورقية الفولاذية بالنوابض الورقية المصنوعة من الالياف الزجاجية المركبة بسبب المتانة العالية مقارنة مع الوزن. يتناول هذا البحث دراسة نوعين من الياف الزجاج هما النوع الاول المنتظم (0-90 ) والنوع الثاني العشوائي مغمور بمادة البوليستر. تم اختبار كلا النوعين للحصول على المواصفات الميكانيكية تحت الحمل المستقر كأختبار الشد وأختبار تحت حمل ديناميكي كاختبار الصدمة. وللحصول على مخططات العمر تم اجراء التجارب تحت حمل ديناميكي متعاكس وهو أختبار الكلال. اظهرت نتائج اختبار الشد ان مقاومة الشد في النوع المنتظم اعلى من مقاومة الشد في النوع العشوائي ومن نتائج اختبار الكلال لوحظ بان عدد الدورات اللازمة للفشل اعلى في النوع المنتظم ,وان نسبة الزيادة في حد الكلال هي 7.5%. اظهر اختبار الصدمة زيادة في الطاقة المصروفة للكسر في النوع العشوائي بنسبة 13.9%. الخصائص المهمة للمواد المركّبه مثل المقاومة العالية نسبة للوزن والتي تعطي مميزات ممتازة للنوابض الورقية عند استخدامها بدلاً مِنْ النوابض الورقية المصنعة من الفولاذِ ، ان استخدام النوابض الورقية المصنعة من المواد المركبة يعطي خفة في الوزن دون أيّ تخفيض على الحملِ والمتانة في نظام التعليق في السيارة. ER -