TY - JOUR ID - TI - Optimization of Pollutants Removal from Textile Wastewater by Electrocoagulation through RSM AU - Ghanim, A.N. PY - 2014 VL - 22 IS - 2 SP - 375 EP - 387 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This study concerns with electrochemical technique known electrocoagulation used to treat a high polluted effluent whereby sacrificial anodes corrode to release active coagulant precursors into the solution. Response Surface Methodology (RSM) was applied in the development of modeling, statistical analyzing, and interpreting the resulted treatment data of textile wastewater by electrocoagulation, besides response, residual, probability, surface and contour plots. A central composite design has been used for the simultaneous study of the effects of operation time and the current density on electrocoagulation responses. The effectiveness of the considered design parameters was well examined to find the optimum experiments with less lack of fit. Models to perform simulated regressions with one response gives the best fitted equation of second-order functions of two factor variables that has been obtained to find optimum removals. The optimum conditions for predicted maximum COD, TSS and Turbidity removals were found to be (56.54 min. and 20mA/cm2), (53.13 min. and 20 mA/cm2) and (54.74 min. and 20 mA/cm2), respectively.

هذه الدراسة تتضمن أستخدام الطريقة المسماة التخثير الكهروكيمياوي وهي تقنيةُ كهروكيمياويةُ تَستعملُ لمعالجة المياه الصناعية المتدفقه ذات المستويات العاليه من التلوّثَ بأستخدام أقطاب تضحية من الحديد تَتأكل لإنتاج مادة مخثرة نشيطة ترتبط مع الملوثات لترسيبها. تم تطبيق منهج الأستجابه السطحية لتحليل نتائج معالجة المياه الملوثه الناتجه من الصناعة النسيجية بأستخدام منظومة مختبرية تعمل بطريقة الوجبات ولعدد من الملوثات مثل المواد الصلبة العالقة الكلية، متطلبِ الكيمياوي للأوكسجينِ ، والكدرة. من خلال منهج الأستجابة السطحية أستخدم تصميم التوليف المركزي لتحديد نوع وعدد التجارب المطلوبة التي تعطي أفضل موديل رياضي لنسبة الأزالة لكل ملوث بدلالة متغيرين هما كثافة التيار وزمن التشغيل, ـوبالتالي تم تحديد الظروف التشغيلية المثلى لأعلى معدل أزالة لكل ملوث. ER -