TY - JOUR ID - TI - تأثير أشعة كاما في بعض الخصائص البصرية لمادة بولي اثيلين عالي الكثافة (HDPE) المذابة في رباعي هيدرو الفيوران (THF) AU - سعد خالد راهي PY - 2014 VL - 25 IS - 1 SP - 53 EP - 62 JO - Al-Mustansiriyah Journal of Science مجلة علوم المستنصرية SN - 1814635X 25213520 AB - This Research includes a study of physical Optical properties for (HDPE) which is dissolved in Tetrahydrofuran before and after irradiation by (γ-ray) and by different doses:1-1st. sample radiated by 1000 Rad with radiation average 55.5 Rad/min for 18 min.2-2nd sample radiated by 2000 Rad with radiation average 55.5 Rad/min for 36 min.3- 3rd sample radiated by 3000 Rad with radiation average 55.5 Rad/min for 54 min The Optical properties had included measurement of absorption, transmittance and refractive index and from it calculate the reflectivity, and absorption coefficient it is found that these properties increase with increasing concentration and also after irradiation except transmittance, absorption coefficient where decreased with increasing of concentration and also after irradiation .Andalso calculated absorption coefficient it was found to be decrease after irradiation. All measurements are calculated at constant room temperature approximate to (25°c).The cause of the change in values of properties may be resulted from cross linking of polymer chains and then increased in the average viscosity molecular weight for material (HDPE) used in research.

تمت دراسة الخواص الفيزيائية البصرية لمادة البولي اثيلين عالي الكثافة (HDPE) المذابة رباعي هيدرو الفوران (THF) قبل التشعيع وبعده باشعة كاما وبجرع مختلفة هي:1. النموذج الاول و المشعع بمقدار 1000Rad اي بمعدل اشعاعي 55.5 Rad /Min ولمدة (18)min. 2. النموذج الثاني و المشعع بمقدار 2000Rad اي بمعدل اشعاعي 55.5 Rad/Min ولمدة (36)min. 3. النموذج الثالث و المشعع بمقدار 3000Rad اي بمعدل اشعاعي/Min55.5Rad ولمدة (54)min. واشتملت دراسة الخواص البصرية على قياس الامتصاصية ومعامل الانكسار والنفوذية وحساب الانعكاسية ومعامل الامتصاص وقد وجد بانها جميعاً تزداد بزيادة التركيز وبعد التشعيع عدا النفاذية ومعامل الامتصاص فوجد انها تقل بزيادة التركيز وبعد التشعيع. وكذلك تم حساب معامل الامتصاص ووجد بانه يقل بعد التشعيع. وقد تمت هذه القياسات في درجة حرارة 25oC.إن سبب التغير في قيم الخصائص قد يكون ناتجا من تشابك السلاسل البوليمرية ومن ثم زيادة المعدل اللزوجي للوزن الجزيئي للمادة البوليمرية المستخدمة في هذا البحث. ER -