@Article{, title={EFFECT OF SHOT PEENING TIME ON MECHANICAL PROPERTIES OF ALUMINUM ALLOY AA2024 –T4 تأثير زمن القصف بالكرات الفولاذية على الخواص الميكانيكية لسبيكة الالمنيوم AA2024-T4}, author={Nashwa Abdul –Hammied Saad Aathraa Husian Hashim Geath Ahmed Kadum}, journal={Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد}, volume={14}, number={1}, pages={46-54}, year={2014}, abstract={This research is devoted to study the effect of shot peening time with steel balls on mechanical properties of AA2024-T4 alloy. The test carried out using standard tensile specimens under various peening times (5, 10 , 15 , 20 and 30 minutes). Results showed an increase in yield and tensile strength values with increasing peening time up to 15 minutes where they were 355 & 505 MPa respectively. Also the strain hardening factor (n =0.26) and strength factor (k = 910 MPa) were maximum at this period of peening .On the other hand the maximum percentage of elongation was 22.7% obtained at 30 minute peening time .

تم في هذا البحث دراسة تأثير زمن القصف بكرات فولاذية على الخواص الميكانيكية لسبيكة الالمنيوم . AA2024 –T4 أجري فحص الشد على العينات المقصوفة بازمان مختلفة (5 , 10 ,15 ,20 , 30 ) دقيقة ، بينت النتائج زيادة قيم مقاومة الخضوع ومقاومة الشد لتسجل اعلى زيادة عند زمن قصف قدره ( 15 ) دقيقة حيث كانت مقاومة الخضوع والشد هي 355 &505 MPa على التوالي. كذلك لوحظ ان أعلى قيمة لمعامل الاصلاد الانفعالي (n = 0.26 ) ومعامل المتانة (k = 910 MPa ) سجلت عند تلك الفترة الزمنية ، في حين كانت أعلى نسبة أستطالة (22.7 % ) عند زمن قصف (30) دقيقة .} }