TY - JOUR ID - TI - The Role of Surface Treatments On the Shear Bond Strength of Artificial Teeth to the Denture Base تأ ثير معالجة أسطح الاسنان الصناعية على قوة الترابط بينها وبين سطح الطقم الاكريلي AU - Dr. Amaal kadhim ALSaadi, B.D.S.,M.Sc. امال الساعدي PY - 2014 VL - - IS - 1 SP - 67 EP - 78 JO - AL-yarmouk Journal مجلة اليرموك SN - 20752954 AB - The study examined the bond between different denture base resins and highly cross-linked acrylic denture teeth with different base surface-conditioning methods. Fourty specimens are prepared from two main groups, each group used a different type of heat cure acrylic resin denture base material .A, B (Rodex&Pigon) Each main groups subdivided into four subgroups according to surface treatment A1,B1=control, no surface conditioning A2,B2=retention groove, A3,B3=grinding, A4,B4=application of methyl methacrylate monomer, After 24 ho of storage in distilled water, compressive load was applied at 90° on the palatal surface of each tooth until fracture.Results: The statistical analysis showed that there were statistically no significant differences between the two type of denture base in improvement of shear bond strength, surfaces treatment of the teeth provided different bond between the acrylic denture base &teeth

هذه الدراسة تقوم بفحص قوة الربط ما بين نوعين مختلفين من اسطح الطقم الاكريلي وبين الاسنان الصناعية وذلك بعد معالجة هذه الاسنان بثلاث طرق والمقارنة بينهم للوصول الى افضل طريقة لمنع انفصال هذه الاسنان عن سطح الطقم او انكسارها عند تعرضها الى قوى القطع خلال عملية المضغ، حيث تم تعريض الاسطح القاطعة للأسنان لقوى عمودية في منطقة ارتباط الاسنان بسطح الطقم الى ان حصل الكسر او الانفصال وبعده قياس مقدار القوة المسلطة اتضح بالمقارنة ان معالجة الاسنان بهذه الطرق المختلفة تعطي قوة ربط مختلفة مع سطح الطقم الاكريلي. ER -