TY - JOUR ID - TI - Measuring and comparing the surface roughness of nickel chromium alloy by using different types of air abrasive materials such as carborundum, aluminum oxide and glass beads. قياس ومقارنة خشونة السطح لسبائك النيكل كروم باستخدام انواع مختلفة للمواد الكاشطة مثل المواد المفحمة, أكسيد الألمونيوم, الحبيبات الزجاجية. AU - Raya Mohammed Jawad PY - 2014 VL - 12 IS - 3 SP - 23 EP - 34 JO - journal of kerbala university مجلة جامعة كربلاء SN - 18130410 AB - Background: One of the important applications of the Abrasive blasting materials such as carborundum, aluminum oxide, glass beads are used to remove rust, impurities, and coatings (paint) from crown and bridges or removable partial denture (chromium cobalt) . Sandblasting techniques are used for cleaning metals, when the metal exposed to abrasive materials to cleaning industrial as well as They are the most important materials used in dental applications but is rarely used for non-metallic work pieces. Surface roughness of cast metal frameworks may lead to difficulties in finishing or polishing procedures and weaken the framework. This study aims: Measuring and comparing the surface roughness of nickel chromium alloy by using different types of air abrasive materials such as carborundum, aluminum oxide, glass beads and evaluating the results of the surface roughness test of nickel chromium alloy after using different types of air abrasive. Methods: Thirty samples from ni.cr. Alloy that exposed to air abrasive materials such as (carborundum, aluminum oxide, glass beads) and specimens were prepared as follow:1- 10 samples for group A (aluminum oxide). 2- 10 samples for group B (carborundum).3- 10 samples for group C (glass beads). Results: Showed that significant differences among these groups. It appeared that the physical properties are: the carborundum material (higher surface roughness 2.22) and the glass beads (lower surface roughness 1.77).Conclusion: the results revealed that the higher surface roughness is the carborundum materials that can be use for retention with ceramic while the lower surface roughness is the glass beads material can be use for cast crown or bridge or removable partial denture (chromium cobalt). Keywords: nickel chromium, air abrasive materials (carborundum, aluminum oxide, glass beads).

الخلفية: من اهم التطبيقات للمواد الكاشطة مثل المواد المفحمة وأكسيد الألومنيوم والحبيبات الزجاجية هي لإزالة الصدأ، الشوائب ، والطلاء (الدهان) من التيجان والجسور أو الطقوم الجزئية المتحركة (الكروم كوبلت). باستخدام تقنيات الرمي بالرمال لتنظيف المعادن، عندما المعدن يتعرض للمواد الكاشطة للتنظيف الصناعي، فضلا عن ذلك فهي تعتبرمن اهم المواد المستخدمة في تطبيقات طب الأسنان، ولكن نادراً ما يستخدم في العمل غير المعدنية. خشونة السطح للهياكل معدنية قد تؤدي إلى صعوبات في التشطيب أو التلميع وهذه الطريقة قد تؤدي الى إضعاف الهياكل المعدنية.الهدف: قياس ومقارنة خشونة سطح سبائك النيكل الكروم باستخدام أنواع مختلفة من المواد الكاشطة مثل المواد المفحمة ، وأكسيد الألمونيوم ، الحبيبات الزجاجية. تقييم نتائج اختبار خشونة السطح من سبائك النيكل الكروم بعد استخدام أنواع مختلفة من المواد الكاشطة.الطريقة: ثلاثين من ni.cr. سبيكة تم تعرضها للهواء المواد الكاشطة مثل و(مواد المفحمة ، وأكسيد الألومنيوم، الحبيبات الزجاجية) وعينات أعدت كالتالي :1 – (10) عينات للمجموعة A (أكسيد الألمونيوم).2 –(10) عينات للمجموعة B (مواد المفحمة).3- (10)عينات للمجموعة C (الحبيبات الزجاجية).النتائج: وأظهرت النتائج أن فروق ذات دلالة إحصائية بين هذه المجموعات. ويبدو أن الخاصية الفيزيائية هي: المواد المفحمة (أعلى خشونة السطح) الحبيبات الزجاجية (أقل خشونة السطح).المناقشة: نستخلص من هذه النتائج إلى أن أعلى خشونة السطح هو المواد المفحمة التي يمكن استخدامها للثباتية مع السيراميك في حين أن اقل خشونة السطح للمواد الحبيبات الزجاجية يمكن استخدامها في عمل التيجان والجسورالمعدنية او الطقوم الجزئية المتحركة (الكروم كوبلت). ER -