TY - JOUR ID - TI - Properties of Superpave Asphalt Concrete Subjected to Impact of Moisture Damage خصائص الخرسانة الاسفلتية فائقة الاداء المعرضة لتأثير الضرر بالرطوبة AU - Saad Issa Sarsam سعد عيسى سرسم AU - Ali Hussein Alwan علي حسين علوان PY - 2015 VL - 21 IS - 1 SP - 1 EP - 14 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Moisture damage is a primary mode of distress occurring in hot mix asphalt (HMA) pavements in Iraq. Because of the loss of bond, or stripping, caused by the presence of moisture between the asphalt and aggregate, which is a problem in some areas and can be severe in some cases, it is requires to evaluate the design asphalt mixture to moisture susceptibility. Many factors such as aggregate characteristics, asphalt characteristics, environment, traffic, construction practices and drainage can contribute to stripping. Asphalt concrete mixes were prepared at their optimum asphalt content by superpave system and then tested to evaluate their engineering properties, which include tensile strength, resilient modulus, and permanent deformation, stiffness, and fatigue characteristics. These properties have been evaluated using indirect tensile strength, uniaxial repeated loading and repeated flexural beam. The experimental results, in general, showed that the mixes subjected to moisture damage give low resistance to indirect tensile strength, low resilient modulus at 40 ̊ C, high permanent deformation at 40 ̊ C, low stiffness, and low fatigue life, by (19%, 21%, 93%, 62% and 70%) respectively as compared with unconditioned mixture.

الضرر بالرطوبة هو اسلوب رئيسي لحدوث الفشل في التبليط بالخلطة الساخنة الاسفلتية في العراق بسبب خسارة الربط، أو التقشر، والناتجة عن وجود الرطوبة بين الأسفلت والركام، والتي هي مشكلة في بعض المناطق ويمكن أن تكون شديدة في بعض الحـالات، فانه من المطلوب تقييم الخلطة الاسفلتية المصممة الى حساسية الرطوبة. أن العديد من العوامل مثل خصائص الركام، وخصـائص الأسفلت، والبيئة، والحجم المرور، وطريقه التنفيذ والصرف يمكن ان تساهم في التقشر. تم إعداد خلطات الخرسانة الإسفلتية فــي نسبة الاسفلت المثلى باستخدام النظام فائق الاداء ومن ثم اختبارها لتقييم الخواص الهندسية الخاصة والتي تشمل قوة الشد، ومعامل المرونة الحركي، تشوه دائم، والصلادة، وخصائص الكلال. وقد تم تقييم هذه الخصـائص باستخدام قوة الشد غـير المباشرة، الحمـل احادي المحور المتكرر وكذلك فحص انحناء الكسر المتكرر. النتائج المختبرية وبشكل عام، أظهرت أن الخلطة المعرضة للضــرر بالرطوبة تعطي مقاومة منخفضة لقوة الشد غـير المباشرة، ومعامل مرونة حركي منخفض عند 40 درجة مئوية وتشوه دائم عالي في 40 درجة مئوية، صلادة منخفضة، عمر كلال منخفض، بمقدار (19٪، 21٪، 93٪، 62٪ و70٪) على التوالي مقارنــة مع خليط غير معرض للرطوبة. ER -