@Article{, title={Effect of Quenching Media, Heat Treatment and Alloying Elements on Properties of Al-Si-Mg Alloy}, author={Abdulazeez O. Mousa Al-Uqaily and Jassim M.Salman Al-Murshdy and Abdalla H. Mihdy Jassim}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={22}, number={4}, pages={803-815}, year={2014}, abstract={Al-Si-Mg alloys have been widely used in automotive and aircraft industries for their good properties, high strength-to-weight ratio and good corrosion resistance. This study aims to preparing of Al-Si-Mg alloy and study the effect of quenching media (polymer solution and water) ,heat treatment and effect of addition alloying elements (B & Ti) on the properties of prepared Al-Si-Mg alloy such as microhardnes and studying the thermal age hardening behavior with artificial ageing time (2-10) hours at temperatures (150,175,200) .The results showed that the addition of 0.15% B with 1% Ti together to base alloy improve Vickers microhardness by (57%) at homogenization condition compared with the base alloy, also the results showed that improvement in thermal stability at ageing temperature 175 when quenching in polymer solution in comparison with the quenching in water. Mechanical properties of prepared alloys were measured by using ultrasonic wave technique, also the microstructure of prepared alloys were appeared by using optical microscopic.

سبائك (ألمنيوم- سيلكون- مغنيسيوم) تستخدم بصورة واسعة في صناعة الطائرات والسيارات لامتلاكها خواص جيدة ، ومتانة عالية نسبة إلى وزنها ومقاومة تآكل جيدة. يهدف البحث الى تحضير السبيكة Al-Si-Mg ودراسة تاثير وسط الاخماد ( محلول البوليمر والماء) والمعاملة الحرارية و تأثير إضافة عناصر السبك (البورون والتيتانيوم) على خصائص السبيكة المحضرة مثل الصلادة الدقيقة ودراسة سلوك الاصلاد الحراري مع زمن التعتيق الاصطناعي ((10-2 ساعة عند درجات الحرارة (150,175,200). بينت النتائج ان أضافة 0.15% B مع 1% Ti معاً للسبيكة الأساس أدى إلى تحسن صلادة فكرز بنسبة (57%) عند ظرف المجانسة بالمقارنة مع السبيكة الأساس. وكذلك النتائج أظهرت تحسن في الاستقرارية الحرارية عند درجة حرارة تعتيق 175 عند الإخماد في محلول البوليمر مقارنة مع الإخماد في الماء.تم قياس الخصائص الميكانيكية للسبائك المحضرة باستخدام تقنية الموجات فوق الصوتية وكذلك تم إظهار البنية المجهرية للسبائك المحضرة باستخدام المجهر الضوئي.} }