TY - JOUR ID - TI - Computational Study and Analysis of the Optical Fiber Tip Mechanical Damage Threats during Laser Surgical Operations دراسة حسابية وتحليل للاضرارالميكانيكية التي تهدد طرف الليف البصري أثناء العمليات الجراحية بالليزر AU - Munqith S. Dawood منقذ سليم داود PY - 2014 VL - 17 IS - 2 SP - 239 EP - 250 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - The damage of optical fiber tips during medical surgical applications of lasers in a liquid environment were noticed in arthroscopic and lithotripsy operations. The phenomenon of the laser produced cavitation bubbles and their collateral mechanical effects on the delivery fiber tip during these operations are studied. It was found that the optical fiber tip is subjected to the threats of the bubbles collapse transient pressures and to the strikes of the produced hammering jets beside the shearing forces due to the high speed bubbles flow. These frequently repeated mechanical forces are calculated for three different sizes of optical fibers. The results showed that to minimize the damage effects of these forces, it is preferable to use the smaller diameter of 200 µm fiber, beside holding the fiber tip at about 5-7 mm away from the treated tissue or calculi targets during the operation to prolong its operating life and in the same time maintaining the efficient ablation.

لوحظ وجود تضرر في اطراف الالياف البصرية المستخدمة في تطبيقات الجراحة الطبية بالليزر التي تجري في الوسط المائي المحيط بمنطقة العمل كما في عمليات الناظور وتفتيت حصى المجاري البولية. وقد درست ظاهرة توليد الليزر للفقاعات المجوفة ومايصاحبها من تاثيرات ميكانيكية على طرف الليف البصري الناقل لاشعة الليزرخلال اجراء هذه العمليات. واوضحت النتائج انه بسبب انهيارهذه الفقاعات يتعرض راس الليف البصري الى تاثيرالضغط الذي يولد هذا الانهيار اضافة الى ظهور ضربات مطرقية وقوى قطع ميكانيكية بسبب السرعة الكبيرة لجريان هذه الفقاعات . وتم حساب هذه القوى الميكانيكية المتكررة المؤثرةعلى راس الفايبر لثلاثة احجام فايبراتبصرية مختلفة واوضحت النتائج انه لاجل تقليل الاضرار الناتجة يفضل استخدام الفايبرات الاقل حجما مثل التي قطرها 200 مايكروميتر وان يتم اجراءالعملية الجراحية بحيث يمسك الفايبر ليكون راسه على بعد 5-7 مللمتر من النسيج أو الحصوة المطلوب معالجتهما لاطالة عمرعمل الفايبر مع الحفاظ على كفاءة عملية القطع في الوقت نفسه. ER -