TY - JOUR ID - TI - Study the Effect of Adding Pharmaceutical Rennie Particles to Composite Materials with Polyester Matrix to be used in Medical Purposes دراسة تأثير أضافة دقائق Rennie الصيدلانية على مواد متراكبة ذات اساس بولي استر لاستخدامها في الاغراض الطبية AU - Hayder Abbas Sallal حيدر عباس صلال AU - Ismail Ibrahim Marhoon إسماعيل ابراهيم مرهون PY - 2014 VL - 17 IS - 2 SP - 56 EP - 67 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - The study carried out on the Rennie filled unsaturated polyester composites of varying size and different filler concentration reveals changes of the mechanical and physical properties of the composites, these changes in the properties of the Rennie filled polymer composites make them suitable for their use in medical, biomedical and pharmaceutical applications on large extent. This work focuses on the preparation of base polymer matrix (unsaturated polyester) composite materials by (Hand Lay-Up) method, and studying the effect of selected grain size (25, 53, and 90) µm of (Rennie) particles on some properties of the prepared composite. Some mechanical tests were used to evaluate the prepared system (Tensile, Compression, Impact, and Hardness) tests, and a physical test of (Water absorption %), and all tests were accomplished at room temperature. Maximum results of tensile strength, elongation at brake, young’s module, compression strength, flexural strength, flexural modulus, impact strength, hardness and water absorption were ((55.6 MPa),( 2.36 %), (2550 MPa), (51.5 MPa), (77.33 MPa), (6072.8 MPa),( 4.48 KJ/m2), (87.5 Shore (D)) and (0.321%)) respectively at using (25µm) except for flexural modulus and water absorption at (90 µm).

أن هذه الدراسة التي تم أجرائها على مسحوق مادة Rennie المقوي لمتراكبات البولي أستر الغير مشبع باستخدام أحجام وتراكيز مختلفة من هذا المسحوق حيث أظهرت تغيراً في الخواص الميكانيكية والفيزياوية لهذه المتراكبات , وأن هذا التغير بالخواص كان مناسباً لاستخدام هذه المواد المتراكبة في المجالات الطبية بشكل كبير. يركز هذا العمل على تحضير مواد متراكبة ذات اساس بوليمري من مادة (البولي أستر غير المشبع) بطريقة (الصب اليدوي)، ودراسة تأثير الحجوم الحبيبة المختارة (25 , 53 ,90) مايكرون من مادة (Rennie) (وبكسور وزنية مختلفة (4%, 8%, 12%, 16%, 20%) على خواص المادة المتراكبة المحضرة. عدد الاختبارات الميكانيكية التي أجريت لتقييم النظام المتراكب المحضر تتضمن (الشدّ، الانضغاط ، الانحناء ,الصدمة والصلادة)، بالإضافة الى الاختبار الفيزيائي (النسبة المئوية لامتصاصية الماء)، وكل الاختبارات اجريت في درجة حرارة الغرفة. النتائج القصوى لمقاومة الشد والاستطالة عند الكسر ومعامل يونك ومقاومة الانضغاط ومقاومة الانحناء ومعامل الانحناء ومقاومة الصدمة والصلادة والنسبة المئوية لامتصاص الماء كانت مرتبة كالتالي ((55.6(MPa, (2.36%), (2550 MPa), (51.5(MPa, (77.33MPa), (6072,8 MPa ), (4.48 KJ/m2), (87.5 Shore (D)), (0.321 %)) عند الحجوم ( 25 ) مايكرون ما عدا معامل الانحناء و الامتصاصية كانت عند الحجم (90 ) مايكرون. ER -