@Article{, title={Catalytic Cracking of Iraqi Vacuum Gasoil Using Large and Medium Pore Size of Zeolite Catalysts التكسير الحفاز لزيت الوقود العراقي باستعمال الزيولايت ذي الحجم المسامي الكبير والمتوسط}, author={Ameel Mohammed Rahman اميل محمد رحمن and Mohanned H. Salman مهند حسيب سلمان and Khalid Waleed Hammed خالد وليد حميد}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={11}, number={1}, pages={73-83}, year={2015}, abstract={The catalytic cracking conversion of Iraqi vacuum gas oil was studied on large and medium pore size (HY, HX, ZSM-22 and ZSM-11) of zeolite catalysts. These catalysts were prepared locally and used in the present work. The catalytic conversion performed on a continuous fixed-bed laboratory reaction unit. Experiments were performed in the temperature range of 673 to 823K, pressure range of 3 to 15bar, and LHSV range of 0.5-3h-1. The results show that the catalytic conversion of vacuum gas oil increases with increase in reaction temperature and decreases with increase in LHSV. The catalytic activity for the proposed catalysts arranged in the following order:HY>HX>ZSM-11>ZSM-22The product distribution depends greatly on the temperature and on the catalyst type. A higher hydrocarbon yields was obtained for HY zeolite catalyst. The selectivity towards high octane number compounds for the proposed catalysts are arranged in the following order:HY>HX>ZSM-11>ZSM-22The cracking conversion is improved by increasing reaction pressure up to 15 bar. The simulated experiments of the catalytic cracking process show that the higher conversion and more desired products can be achieved to conventional feeds.

تمت دراسة تحويل التكسير الحفاز لزيت الغاز العراقي الناتج من الوحدات الفراغية باستعمال عدة أنواع من الزيولايت ذات الحجم المسامي الكبيرة والمتوسط (HY، HX، ZSM-22 و ZSM-11). تم تحضير هذه العوامل مختبريا واستعملت في العمل الحالي. جرت تفاعلات التحول الحفاز في وحدة تفاعل مختبرية ومستمرة ومن نوع الحشوة الثابتة. أجريت التجارب بدرجات الحرارة تراوحت من 673 إلى 823 كلفن، وضغط تراوح من 3 إلى 15 بار، وبسرع فراغية تراوحت 0.5 الى 3 ساعة-1. بينت النتائج أن التحول الحفاز لزيت الغاز يزداد مع زيادة درجة حرارة التفاعل ويتناقص مع زيادة السرعة الفراغية. ان ترتيب الفعالية التحفيزية للعوامل المساعدة المستخدمة يمكن ترتيبها بالشكل الآتي: HY> HX> ZSM-11> ZSM-22ان توزيع نواتج التفاعل يعتمد الى حد كبيرة على درجة الحرارة وعلى نوع العامل المساعد. تم الحصول على أعلى معدلات لنسبة النواتج للعامل المساعد HY. ان انتقائية التفاعل باتجاه تكوين مركبات ذات رقم اوكتاني عالٍ بالنسبة للعوامل المساعدة المستخدمة يمكن ترتيبها بالشكل الآتي: HY> HX> ZSM-11> ZSM-22يمكن تحسين تحول التكسير الحفاز بزيادة الضغط. ان تجارب المحاكاة لعملية التكسير الحفاز أظهرت بأنه بالإمكان الحصول على تحول عالٍ وتحسين معدلات إنتاج المنتجات المطلوبة من المواد الأولية التقليدية.} }