@Article{, title={Design and Analysis of Transmission Optical Filter with Multi- FPR Structure for Dense Wavelength Division Multiplexing (DWDM) Communication System تصميم وتحليل مرشحة بصرية نفاذة بتركيبة متعددة إل FPR لمنظومة اتصال متعددة الإرسال فاصلة لأطوال موجية كثيفة}, author={Aseel Abdul Ameer Shakaty}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={5 Part (A) Engineering}, pages={1197-1215}, year={2014}, abstract={In this paper, it is demonstrated by means of simulations, the practical feasibility of a transmission filter implemented from a stack of high and low index birefringent thin films. Simulations were carried out with a software toolbox package implemented as Matlab™ m-files. The following materials were used ( ZnSe, GaAs, BaF2) as coating materials and KB7 glass as substrate material .In this paper it can be study the designing of transmission filter with two ,three or four Fabry- Perot resonators (FPRs) structure .The difference between each one of them show how the number of multi-stack layer belonging to each FPRs affect on the spectral properties of transmission filter and effect on the choosing of coating material on the properties of transmission filter . Results show that transmission filter of multi- FPRs results in narrowing the transmittance band and making it somewhat flatter at its top from the single one. But if it has multi- FPRs structure with equal length , the band becomes flatter than that of transmission filter with single FPR structure but exhibits some ripples. The difference between the values of refractive index of multi layer stack has great influence on the transmittance value, the spectral properties and number of peaks in the transmittance spectrum of the transmission filter as shown in the simulated figures.

في هذا البحث، يتجلى من خلال المحاكاة، تنفيذ الجدوى العملية لمرشحات بصرية نفاذة و الممثلة بحزمة من الاغشية الرقيقة ذات المعامل الانكسار العالية والمنخفضة المصنوعة من المواد ثنائية الانكسار. وأجريت المحاكاة بمجموعة الأدوات البرمجية المنفذة ضمن ملفات برنامج Matlab. وقد استخدمت المواد التالية في التصميم (ZnSe, GaAs, BaF2) كمواد طلاء و زجاج KB7 كمادة اساس. في هذه البحث تمت دراسة تصميم مرشحة بصرية نفاذة ذات التركيب المكون من اثنين، ثلاثة او أربعة من مرنان فابري بيروت (FPRs) ، والفرق بين كل واحد منهم . وقد تبين أن عدد الطبقات الثنائية العائدة لكل مرنان يؤثر على الخصائص الطيفية للمرشح النافذ , و تاثير مواد الطلاء المختارة على خصائص ذلك المرشح. تظهر النتائج أن المرشح الناقل متعدد FPRs له تأثير تقليص نطاق النفاذية وجعلها منبسطة إلى حد ما في قمتها من المرشح الاحادي وإذا كان المرشح لديه بنية متعددة FPRs ذات الطول المتساوي ، فعند ذلك، تصبح الحزمة اكثر انبساطا من تلك التابعة للمرشح الاحادي ولكن تعرض بعض التموجات.لقد ظهر ان الفرق بين قيم معامل الانكسار في حزمة متعددة الطبقات لديه تأثير كبير على قيمة النفاذية، والخصائص الطيفية وعدد القمم بطيف النفاذية للمرشح البصري و كما موضح في اشكال المحاكاة.} }