TY - JOUR ID - TI - Removal of SO2 over Modified ActivatedCarbon in Fixed Bed Reactor: II.Effect ofProcess Variables on the Characteristics of Mass Transfer Zone ٳزالة غاز ثنائي اوكسيد الكبريت في مفاعل الطبقة الثابتة بٳستخدام الكاربون المنشط المطور: 2- تأثير المتغيرات التشغيلية على خصائص منطقة انتقال الكتلة AU - Neran Khalel Ibrahim AU - Shahrazad Refat Raouf AU - Zainab Adnan Nasir PY - 2014 VL - 32 IS - 7 Part (A) Engineering SP - 1825 EP - 1842 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Adsorption of sulfur dioxide (SO2) onto NiO supported activated carbon (Ni/AC)in fixed bed reactor under different operating conditions was studied. Using 7Ni/AC catalyst, the effect of two process variables: namely gas flow rate(80 ≤ Q ≤ 290l/h equivalent to superficial gas velocity 263 ≤ Vg ≤ 955 cm/min) and bed height(4 ≤ H ≤ 8)cm on the desulfurization activity and the characteristics of mass transfer zone(MTZ) were investigated. Breakthrough curves for SO2 under various adsorption conditions were obtained and some characteristic parameters such as breakthrough time (τ0.05), exhaustion time(τ0.95)and length of mass transfer zone (LMTZ) were derived from these breakthrough curves. The experimental results revealed that on increasing gas rate for all bed heights two regions are developed. Keywords: SO2 Removal, Ni Supported Activated Carbon, Fixed Bed Reactor, Breakthrough curves, Mass Transfer Zone

تم في هذا البحث دراسة ٳمتزاز غاز ثنائي اوكسيد الكبريت على الكاربون المنشط المحمل باوكسيد النيكل في مفاعل الطبقة الثابتة تحت ظروف تشغيلية مختلفة. الكاربون المنشط المحمل بـ(7٪) من اوكسيد النيكل (7Ni/AC) تم دراسة تأثير متغيرين تشغيليين هما : معدل تدفق الغاز( (80-290) لتر/ساعة المكافئ الى سرعة الغاز (263-955) سم/دقيقة ) وارتفاع الحشوة (4-12) سم على فعالية ٳزالة غاز ثنائي اوكسيد الكبريت وخصائص منطقة ٳنتقال الكتلة (MTZ). تم الحصول على منحنيات ٳختراق غاز ثنائي اوكسيد الكبريت (Breakthrough curves) تحت ظروف ٳمتزاز مختلفة وبعض المعايير المميزة مثل زمن الاختراق (Breakthrough timeτ0.05) , زمن النفاذ (Exhaustion timeτ0.95) وطول منطقة انتقال الكتلة (LMTZ)التي استمدت من هذه المنحنيات . أظهرت النتائج العملية ظهور منطقتين بزيادة معدل تدفق الغاز لجميع ٳرتفاعات الحشوة. ER -