@Article{, title={Study of Corrosion Resistance of Co-Cr-Mo Surgical Implants Alloy in Artificial Saliva دراسة مقاومة التاكل لسبيكة الزوارع الجراحية ذات اساس كوبلت-كروم- مولبدنيوم في اللعاب الاصطناعي}, author={Muna Khethier Abbass and Sami Abualnoun Ajeel and Haitham M. Wadullah}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={10 Part (A) Engineering}, pages={2331-2339}, year={2014}, abstract={Co-Cr-Mo alloy has been used for biomedical implant for a number of years. In this study, ASTM F-75 Cobalt-base substrate specimen was immersed in artificial saliva at 37 + 1 ºC to study the corrosion resistance properties. Surface of specimen before and after the immersion was analyzed by optical microscope and Scanning Electron Microscopy (SEM). X-Ray Diffraction (XRD) was used to study the phase structure present. The metallic ions in the artificial saliva were analyzed after the corrosion test by Absorption Spectrophotometer (AAS). Electrochemical Measurements by polarization experiments were performed to study the corrosion resistance, the main results obtained were expressed in terms of the corrosion potentials (Ecorr) and corrosion current density (icorr) in addition to measure the Tafel slops by Tafel extrapolation method, and also cyclic polarization are used in artificial saliva solution. The results of galvanic corrosion show that the Co-Cr-Mo alloy had localized corrosion in artificial saliva at 37+1ºC.

تستخدم سبيكة كوبلت – كروم – مولبيدينيوم في زراعة المواد الطيبة لسنوات عديدة . في هذه الدراسة ، غمرت نماذج سبيكة ASTM F-75 ذات الاساس كوبلت في اللعاب الصناعي بدرجة حرارة 37 + 1درجة مئوية لدراسة مقاومتها للتآكل. تم تحليل سطح النماذج قبل وبعد التآكل باستخدام المجهرالضوئي والمجهرالالكتروني الماسح (SEM). وكذلك تم دراسة حيود الاشعة السينية ( X-Ray Diffraction) لدراسة الاطوار الموجودة في السبيكة. واجراء تحليل للايونات المعدنية في سائل اللعاب الصناعي بعد اختبار التآكل. أجريت القياسات الكهروكيميائية بواسطة تجارب الاستقطاب لدراسة مقاومة التآكل، والنتائج الرئيسية التي تم الحصول عليها بعد التعرض للعاب الصناعي تتمثل بجهد التآكل(Ecorr) وكثافة تيارالتآكل (icorr) بالإضافة إلى قياس ميول تافل لمنحنيات تافل( Tafel ) بطريقة تافل للاستقراء وكذلك الاستقطاب الحلقي في اللعاب الاصطناعي. تبين نتائج التأكل الكلفاني بان سبيكة كوبلت- كروم- مولبيدينيوم المطلية تتآكل موضعيا في اللعاب الاصطناعي عند درجة حرارة 37 درجة مئوية.} }