Fulltext

On the Performance of a Microstrip Antenna Based UC-PBG Structures for UHF RFID Readers

Ali S. Jalal --- Marwa H. Jwair

Engineering and Technology Journal مجلة الهندسة والتكنولوجيا
ISSN: 16816900 24120758 Year: 2018 Volume: 36 Issue: 5 Part (A) Engineering Pages: 480-487
Publisher: University of Technology الجامعة التكنولوجية

Abstract

Microstrip antennas suffer from low gain bandwidth product due to surface wave effects and aperture diffractions that limit their use for long-range communications. On top of that, the difficulty of achieving a pure circularly polarized radiation with high gain due to the feeding structure effects. This paper is subjected to design a gain enhanced circularly polarized patch antenna using Uniplanar Compact-Photonic Band Gap (UC-PBG) structu.res for UHF RFID applications. The patch is structured as truncated corners with cross slots at the centre mounted on an FR-4 epoxy substrate of 1.6mm thickness with an overall area of 188×188mm2. The UC-PBG is constructed of two layers; each is made of 7×7 unit cells, separated by 20mm mounted from the top of the patch at 30mm height. The unit cell characterizations are evaluated in terms of their S-parameters and dispersion diagram CST-MWS environment. The antenna shows a boresight gain of about 8.2 dBi at 915MHz with a front to back ratio (F/B) of 13dB. The benchmark enhancement in boresight gain after adding the UC-PBG layers is found to be 3.4 dBi with a radiation efficiency of 87%. Finally, an excellent agreement is achieved between the obtained measurements and numerical results.

Keywords

Circular polarization --- RFID --- UHF --- UC-PBG.