Influence of Operating Conditions on Adsorption of Lead (II) Ions From Contaminated Water Using Different Adsorbents

تأثير الظروف التشغيلية على امتزاز ايونات الرصاص من المياه الملوثة بأستخدام مواد ممتزة مختلفة

Areej Dalf Abbas

Engineering and Technology Journal مجلة الهندسة والتكنولوجيا
ISSN: 16816900 24120758 Year: 2012 Volume: 30 Issue: 6 Pages: 991-1000
Publisher: University of Technology الجامعة التكنولوجية


Removal of heavy metals from water and wastewater has received a great deal of attention. Adsorption is one of the most technologies being used for treatment of polluted water. This study records lab scale experiments to test efficiency of activated carbon as an adsorbent and comparing it with low-cost naturally occurring materials (sand & egg shells) in removing lead ions from wastewater. The adsorption of lead ions from solutions containing different initial lead concentrations (100, 150 and 200 ppm pb as lead nitrate) using different particlesize (140, 300 and 500 ìm) and different doses of activated carbon, sand and egg shells at different pH (4, 7 and 10) was examined. Also the metal concentration retained in the adsorbent phase (mg/g) was calculated. This method of heavy metals removal proved highly effective as removal efficiency increased with increasing adsorbent dose while it decreased with increasing metals concentration. The results revealed that of the studied adsorbents, the activated carbon showedthe highest adsorption capacity and the maximum adsorption can be obtained by using particle size of 140 ìm in neutral media (pH 7). This technique might be successfully used for the removal of lead ions from liquid industrial wastes and wastewater.


lead removal --- adsorption --- heavy metals --- wastewater treatment --- activated carbon