Table of content

Engineering and Technology Journal

مجلة الهندسة والتكنولوجيا

ISSN: 16816900 24120758
Publisher: University of Technology
Faculty: Presidency of the university or centers
Language: Arabic and English

This journal is Open Access

About

The Journal aims to disseminate knowledge in the fields of Engineering, Technology and Sciences .All the researches will submit to the scientific evaluation procedures of publishing and documentation. The journal under takes only the publishing of the new researches that had not been published previously on other journals or debated in conferences.

The Instructions of Submitting The Research to Scientific Evaluation:
a- The research should be Submitted in 4 copies in Arabic or English Languages, auther's name should be eliminated from 2 copies only. The abstract should be typed on the front page not exceeding (150 words) in both Arabic and English on size (A4) sheet. Pages should be numbered and not more than (15) page.
b- The researcher should fill a declaration form which states that he doesn't publish the research during the evaluation period. He must give his full address phone number and e-mail.

Firstly- The author should pay a fee of (ID55000) when he submits the research and a fee of (ID55000) when the research is accepted .These fees are obligatory for all. The sum cannot be reimbursed in any case.
Secondly- The annual subscription in the journal inside Iraq is ID250000) Iraqi dinar, and outside Iraq is (us $250) abroad.
____________________________________________
____________________________________________
Engineering and Technology Journal
Publication Ethics
The publication of science and technology include thorough, methodical and complete processes by publishers and editors which have to be handled efficiently and proficiently. To sustain high ethical values of publication, publishers attempt to work intimately at all times with editors, authors, and peer-reviewers. The ethics statement for the Engineering & Technology Journal is based on those issued by the Committee on Publication Ethics (COPE) Code of Conduct guidelines available at www.publicationethics.org. The basic publishing ethics involved in the publishing process can be summarized as follows:

Reviewers’ Responsibilities
The responsibilities of the reviewers can be identified as:
• To provide a detailed, effective, and unbiased evaluation in promptly on the scientific content of the work.
• To indicate whether the writing is relevant, brief and clear and evaluating the originality and scientific accuracy of the submitted paper.
• To maintain the confidentiality of the complete review process.
• To inform the journal editor about any financial or personal conflict of interest and reject to review the manuscript when a possibility of such a conflict exists.
• To inform the journal editor of any ethical concerns in their evaluation of submitted manuscripts; such as any violation of ethical treatment of animal or human subjects or any considerable similarity between the previously published article and any reviewed manuscript.

Authors’ Responsibilities
The responsibilities of the authors can be described as:
• To assure that all the work reported in the manuscript must be original and free from any plagiarism.
• To make confident that the submitted work should not have been published elsewhere or submitted to any other journal(s) at the same time.
• To explicitly acknowledge any potential conflict of interest.
• The author(s) must give proper acknowledgments to other work reported (individual/company/institution). Permission must be obtained from any content used from other sources.
• It is important to note that only those who have made any substantial contribution to the interpretation or composition of the submitted work should be listed as ‘Authors’. On the other hand, other contributors should be mentioned as ‘co-authors’.

Publishers’ Responsibilities
The responsibilities of the Engineering & Technology Journal can be defined as:
• Engineering & Technology Journal is committed to working with journal editors, defining clearly their relevant roles, in order to ensure appropriate decisions regarding publication procedures and maintaining the transparency of editorial decisions.
• Engineering & Technology Journal guarantees the integrity autonomy and originality of each published article concerning:
o publication and research funding
o publication ethics and integrity
o conflicts of interest
o confidentiality
o authorship
o article modifications
o timely release of content.
____________________________________________
____________________________________________

ENGINEERING AND TECHNOLOGY JOURNAL
Scientific Refereed Journal Issued by University of Technology, IRAQ
COPYRIGHT AGREEMENT

The following assignment of copyright, executed and signed by the Author, is required with each manuscript submission. If the article is a “work made for hire”, the employer must sign it. The Author warrants that he/she has full power to make this agreement on behalf of himself and all his co-authors.
To the extent transferable, copyright in and of the undersigned, Author’s article titled:
************************************************************************by: *************************************************Reference ID: ******* submitted to the Engineering and Technology Journal is hereby assigned for publication.
In consideration of the acceptance of the Article for publication, the Author assigns to the Journal with full title guarantee, all copyrights, rights in the nature of copyright, and all other intellectual property rights in the Article throughout the world (present and future, and including all renewals, extensions, revivals, restorations and accrued rights of action).
The Author represents that he is the author and proprietor of this Article and that this Article has not heretofore been published in any form. The Author warrants that he has obtained written permission and paid all fees for use of any literary or illustration material for which rights are held by others. The Author agrees to hold the Editor(s)/Publisher harmless against any suit, demand, claim or recovery, finally sustained, by reason of any violation of proprietary right or copyright, or any unlawful matter contained in this article:



Signature: Date:
Name of Author:
Institution or Company:

Loading...
Contact info

جمهورية العراق –بغداد
الجامعة التكنولوجية- مجلة الهندسة والتكنولوجيا- ص.ب. 35010
Email: etj@uotechnology.edu.iq
____________________________________________
Journal website:
http://uotechnology.edu.iq/tec_magaz/EN/index.htm
____________________________________________
Republic of Iraq, Baghdad
University of Technology, Engineering & Technology Journal.
P.O.Box.35010
Email: etj@uotechnology.edu.iq

Email: uot_magaz@yahoo.com
__________________________________________
__________________________________________

Google Scholar Citations:
________________________
https://scholar.google.com/citations?user=w1aCAoMAAAAJ&hl=en

Table of content: 2012 volume:30 issue:6

Article
Mechanical Properties For Pipes Made From Composite Materials (Glass/ Epoxy And Carbon/ Epoxy) Subjected To Internal Pressure
الخواص المیكانیكیة لأنابیب مصنوعة من مواد مركبة (ألیاف الزجاج/ ایبوكسي+كاربون/ ایبوكسي) معرضة لضغط داخلي

Loading...
Loading...
Abstract

Composite Materials have been used extensively in application such as pipes and pressure vessels. Therefore it is important for further studies on the properties of these materials. This paper presents the results from a series of tensile tests on the mechanical properties of composite materials. Specimens cut from pipes made from composite materials were tested under internal pressure loadings have been tested by using a series of ASTM Standards test methods for mechanical properties. Based on the results obtained, the longitudinal E11, transverse E22 and shear modulus G12 of 101.2 GPa, 5.718 GPa, 4.346 GPa and 36.6, 5.4 GPa, 4.085 GPa for carbon and glass fiber/ epoxy composites, respectively, while the ultimate longitudinal XL, transverse XT and shear tensile τ0 strengths of 1475.4 MPa, 20 MPa, 36 MPa and 618.9 MPa, 14 MPa, 28 MPa for carbon and glass fiber/epoxy composites, respectively. The results from this series of tests have been presented and compared with results from analytical equations. Good agreement was achieved between the experimental results and analytical results.تم استخدام المواد المركبة على نطاق واسع في التطبيقات العملية ،و الصناعية مثل الأنابيب و أوعية الضغط لذلك فأّنه من الضروري ، اجراء المزيد من الدراسات على خواص هذه المواد. هذه الدراسة تقدم صورة واضحة للخواص الميكانيكية لهذه المواد المركبة مستندة على اختبارات الشد، حيث ان العينات قطعت من انابيب مصنوعة من مواد مركبة معرضة المتعلقة بالخواص ASTM الى ضغط داخلي وقد انجز العمل وفق اسس ومعايير المواصفة المستعرض و معامل E الطولي 22 E الميكانيكية ،ومن تلك الأختبارات حصلنا على نتائج 11 4.058GPa, 5.4GPa, 36.6GPa, وكانت للزجاج والكاربون على التوالي G القص 12 4.346 وهذه النتائج للمواد المركبة من الكاربون وألياف GPa, 5.718GPa, 101.2GPa وعلى التوالي بينما ، ( carbon and glass fiber/ epoxy composites) الزجاج هي τo واجهاد القص Xt والمستعرضة ، XL الأجهادات الطولية 28 للمواد المركبة من الكاربون و MPa,14MPa,18MPa,36MPa,20MPA,1475.4 ألياف الزجاج مع الايبوكسي على التوالي ، وكانت نتائج الاختبارات العملية عند مقارنتها مع المعادلات التحليلية متطابقة بشكل جيد


Article
Study of some optical Properties of PbS thin films deposited by Chemical Spray Pyrolysis Method
دراسة بعض الخواص البصرية والكهربائية لاغشية اوكسيد الزنك المحضرة بطريقة التحلل الكيميائي الحراري

Authors: Ban Kalid Mohammed
Pages: 135-145
Loading...
Loading...
Abstract

In this paper, the ZnO thin films have been prepared by spray research thickness (300nm) on a glass substrates and studying its optical and electric properties. The results of (X-Ray ) diffraction showed that the films have a polycrystalline structure , The Absorption and The transmission as a function of photon energy for ZnO films had been studied. The Investigation of energy gap of the direct allowed transitions of ZnO film showed a value of (3.14 eV). The optical Absorption coefficients have been studied as a function of Photon Energy See beck measurements revealed that ZnO thin films are n-type.بطريقة التحلل الكيميائي ZnO تم في هذا البحث تحضير غشاء اوكسيد الزنك 300 ) على قاعدة من الزجاج حيث تم دراسة الخصائص البصرية nm) الحراري وبسمك والكهربائية . ان الاغشية ذات تركيب متعدد (X-Ray) تبين من خلال نتائج حيود الاشعة السينية البلورة وجرى دراسة علاقة كل من الامتصاصية و النفاذية كدالة لطاقة الفوتون لاغشية كما جرى حساب فجوة الطاقةالمسموحة للانتقال المباشر المسموح للاغشية وكانت ZnO 3.14 )وتم دراسة معامل الامتصاص كدالة لطاقة الفوتون . eV) . ( n-type) ذات توصيلية مانحة ZnO اظهرت نتائج سبيك بان اغشية اوكسيد الزنك

Keywords


Article
Energy Saving Using Intelligent Controller Based on Fuzzy Logic Control
حفظ الطاقة باستخدام مسيطر ذكي اعتمادا على السيطرة بالمنطق المضبب

Authors: Krikor S.Krikor --- Abduljabbar O.H Alshammery
Pages: 920-938
Loading...
Loading...
Abstract

To reduce the impact of the high current on the power grid from the start process of the large induction motor and eliminate the negative influences of traditional reduced voltage start on the electronic and mechanical equipments and enhance the ability of the energy saving of the system. We studied and improved the intelligent soft start of such motors, this paper presents the design of intelligent soft starting controller in viewpoint of energy saving for power electronic systems. The proposed controller was compared through experimental studies under identical conditions with the thyristor soft starting controller (conventional controller). The performance comparison is made on the aspects of power quality and energy saving advantages. It is found that the proposed controller has superior operating and performance characteristics as compared to the conventional one.من أجل تقليل تأثير التيار العالي في شبكة القدرة من جراء عمليات التشغيل الابتدائي للمحرك الحثي ذو القدرة العالية وحذف التأثيرات السلبية للطرق التقليدية لتقليل فولتية البدء في الاجهزة الميكانيكية والالكترونية وأمكانية تحسين حفظ الطاقة للنظام، نقدم دراسة وتحسين بدء تشغيل سلس وذكي لهذه المحركات، هذا البحث يقدم تصميم مسيطر ذكي لبدء التشغيل من وجهة نظرحفظ الطاقة لانظمة القدرة الالكترونية. المسيطر المقترح قورن من خلال الدراسات المختبرية تحت ظروف متطابقة مع مسيطر بدء تشغيل سلس تقليدي يعمل بالثايروستور، قورن الاداء من جوانب مميزات كمية القدرة وحفظ الطاقة ووجد ان عمل وخواص الاداء للمسيطر المقترح يعمل بشكل ممتاز مقارنة مع المسيطر التقليدي.


Article
Determination of Some Biochemical Marker Levels in Serum of Patients with Congestive Heart Failure, Angina Pectorisand Myocardial Infarction
تحديد مستوى بعض المؤشرات الكيموحيوية في مصل مرضى عجز القلب الاحتقاني والذبحة الصدرية والجلطة القلبية

Authors: Maysoon M.N.M. Saleem
Pages: 939-949
Loading...
Loading...
Abstract

The study enrolled a total of 33 patients with congestive heart failure, angina pectoris and myocardial infarction for evaluation of the activity of enzymes, creatine kinase, and aspartate transaminase, concentrations of calcium, cholesterol, and triglyceride and they were compared with 16 normal healthy human. .This study involved three groups of patients a first one consisted of 9 patients with congestive heart failure. Second group of 9 patients with angina pectoris with chest pain. Third group consisted of 15 patients with myocardial infarction. They were obtained from Ibn-Al-Bay tar hospital and Ibn-Al-Nafess for cardiac care unit of Baghdad. They were investigated for enzymes activity and concentration of calcium, cholesterol, and triglyceride. There was very highly significant increase in the activities of creatine kinase, aspartate transaminase (P< 0.001) with different heart diseases when compared with normal healthy subjects. The result demonstrated a statistically significant decrease in the concentration of calcium (P< 0.001) and significant increase in concentration of Cholesterol and triglyceride when compared with normal healthy subjects with different heart diseases (P< 0.001).شملت الدراسة 33 عينة من امصال المرضى المصابين بأمراض احتقان القلب والذبحة الصدرية والجلطة القلبية وتم تقدير فعالية انزيمات الكرياتين كاينيزواسبارتيتترانسامينبز وتراكيز الكالسيوم والكوليسترول والشحوم الثلاثية لهؤلاء المرضى وتمت مقارنتهم مع 16 عينة منالأشخاص الاصحاء. تضمنت الدراسة ثلاث مجاميع من المرضى المصابين بأمراض القلب ، شملت المجموعة الاولى تسعة اشخاص من المرض ى المصابين بأمراض احتقان القلب ، المجموعة الثانية المرضى المصابين بأمراض الذبحة الصدرية وكان عددهم تسعة والمجموعة الثالثة كانت لخمسة عشر عينة من المرضى المصابين بأمراض الجلطة القلبية . تم جمع العينات للمرضى الراقدين في مستشفى ابن البيطار ومستشفى ابن النفيس / وحدة العناية الم ركزة لأمراض القلب في بغداد وتم تقدير فعاليةالانزيمات كرياتين ك اينيزوالاسبارتيتترانس امينيز لهذه العينات وتراكيز الكالسيوم والكولسترول والشحوم الثلاثية . بينت النتائج ارتفاع في P< احصائي ملحوظ لفعالية انزيمات الكريانينكاينيزوالاسبارتيتترانسامينيز 0.001 كلحالاتامراض القلب المختلفة عند مقارنتها بالأشخاص الاصحاء، كما اوضحت وارتفاع في تراكيز P< النتائجوجود نقصان معنويملحوظفيمستوى الكالسيوم 0.001 عند مقارنتها بالأشخاص الاصحاء لكل حالات P< الكولسترول والشحوم الثلاثية 0.001 امراض القلب


Article
Study of the Direct Extrusion Behavior of Aluminum and Aluminum Alloy-2014 Using Conical Dies
دراسة سلوك البثق المباشر للألمنيوم وسبيكة الألمنيوم - 2014 بإستخدام قوالب مخروطية

Authors: Ahmed A. Akbar --- Rabiha S. Yaseen
Pages: 950-958
Loading...
Loading...
Abstract

The present work concerns with study of extrusion behavior of aluminum alloy-Al2014 comparing with pure aluminum-Al1050, using different die angles (á=15, 30 and 75°) and different billet lengths (20, 28, 40 and 52mm). Results showed that the extrusion load increase when billet length increases for aluminum alloy (Al-2014) and pure aluminum (Al-1050). The results also showed that small die angles required higher extrusion load than large die angles. The Brinell hardness values showed that aluminum alloy (Al-2014) undergoes higher work hardening due to the presence of copper compared with the pure aluminum (Al-1050), in addition to formation of dead metal zone which resists the metal flow through the die opening.


Article
Effect of Some Anti-Inflammatory Drugs on The Corrosion Behavior of Implant Biomaterials in Human Body Fluid
تأثير بعض الادوية المضادة للالتهاب على سلوك تاكل المواد الحيوية المزروعة في محيط جسم الانسان

Loading...
Loading...
Abstract

The aim of this research is to compare the electrochemical behavior of two surgical implant biomaterials alloys, SS 316L and Co–Cr–Mo alloy in simulated body fluid. This comparison is focused on the influence of presence of three anti-inflammatory drugs, aspirin (C9H8O4), paracetamol (C8H9NO2), and mefenamic acid (C15H15NO2) with three concentrations of each drug (0.00303, 0.00606, and 0.01212), (0.0086, 0.0172, and 0.0344), and (0.00111, 0.00156, and 0.00201) g/300ml respectively at pH=7.4 and 37oC using electrochemical techniques, potentiodynamic curves and potentiostatic tests. Influence of these drugs on both biomaterials depends on the formation of organometallic complexes between released metals ions from implant alloys and drugs molecules. The study shows that the drugs behave as inhibitors for SS 316L through the measured corrosion parameters, while gives irregular behavior in the case of Co – Cr – Mo alloy. However, difference between two alloys appear with different affinity of released metal ions to binding with other molecules inside human body.


Article
Analysis of Fibrous Reinforced Concrete Beams
تحلیل العتبات الخرسانیة المسلحة والمعززة بالالیاف الفولاذیة

Loading...
Loading...
Abstract

Steel fiber reinforced concrete is used as a construction material in modern structures. Recent studies have shown that steel fiber can be used to improve the behavior of structures and increase the bending moment capacity and shear strength of reinforced concrete members. This research present and modify the nominal and ultimate bending moment equation, maximum and balance reinforcement indices and depth of compression zone for different types of reinforced concrete beams: single, double and T beams including the effect of steel fibers. The modified equations showed that the internal moment capacity of the beams with steel fiber increased by the amount ( ) which represent the participation of the steel fiber. The balance and maximum reinforced indexes ( & )decreased by ( ) for single, double & T-beam reinforced concrete, this means that the ductility increased by adding steel fiber. Also the depth of compression zone increased by a factor ( ) which is greater than (1.0). The modified equations are verified and applied on the reinforced concrete beams with steel fibers which tested in previous study, the theoretical results showed excellent agreement with the experimental values.


Article
Influence of Operating Conditions on Adsorption of Lead (II) Ions From Contaminated Water Using Different Adsorbents
تأثير الظروف التشغيلية على امتزاز ايونات الرصاص من المياه الملوثة بأستخدام مواد ممتزة مختلفة

Authors: Areej Dalf Abbas
Pages: 991-1000
Loading...
Loading...
Abstract

Removal of heavy metals from water and wastewater has received a great deal of attention. Adsorption is one of the most technologies being used for treatment of polluted water. This study records lab scale experiments to test efficiency of activated carbon as an adsorbent and comparing it with low-cost naturally occurring materials (sand & egg shells) in removing lead ions from wastewater. The adsorption of lead ions from solutions containing different initial lead concentrations (100, 150 and 200 ppm pb as lead nitrate) using different particle size (140, 300 and 500 ìm) and different doses of activated carbon, sand and egg shells at different pH (4, 7 and 10) was examined. Also the metal concentration retained in the adsorbent phase (mg/g) was calculated. This method of heavy metals removal proved highly effective as removal efficiency increased with increasing adsorbent dose while it decreased with increasing metals concentration. The results revealed that of the studied adsorbents, the activated carbon showed the highest adsorption capacity and the maximum adsorption can be obtained by using particle size of 140 ìm in neutral media (pH 7). This technique might be successfully used for the removal of lead ions from liquid industrial wastes and wastewater.


Article
Deflection Estimation of Un-Symmetric Isotropic Cam with Three Circular-Arc Contact Profiles
تخمين التشوه للحدبة الايزوتروبيكية غير المتناظرة بوجود ثلاث اقواس تماس – دائرية لهيئته

Authors: Louay Sabah Yousuf
Pages: 1001-1016
Loading...
Loading...
Abstract

In this paper the principal objectives is to design a suitable profile that produces minimum value of jerk and contact stress keeping the acceleration within a limit especially in high-speed machine. Many works in the experimental part are done on the synthesis of cam profile in accuracy and system flexibility on the output follower motion; but there is a lack in the analytical part. The analytical formulation has been done with classical plate theory of un-symmetric cam with three circular-arc contact profiles using the equation of circular plate solution due to the distributed load comes from the perpendicular contact harmonic motion of the follower. The cam used in the paper can be found in cutting and metal forming tools, heavy duty of marine engine, and fast manufacturing equipment. The aim of the present paper is to calculate the maximum deflection on cam boundaries varying with (r and θ) coordinates between beginning and ending of contact follower loadings. The results were classified into mathematical model and finite element using software ANSYS.


Article
On t*-Generalized Compact and t* -Generalized C-Compact Mappings

Authors: Shymaa Hussain Salih
Pages: 1017-1028
Loading...
Loading...
Abstract

This paper, will introduce some types of compact mapping called t * - generalized compact mapping by using t * - generalized compact sets and giving some properties of their mappings, Moreover, showing the relationship between these types.


Article
Seismic Response Damage of Nuclear Tower
اضرار الاستجابة الزلزالية لبرج نووي

Authors: Kadhim Karim Mohsen
Pages: 1029-1047
Loading...
Loading...
Abstract

The seismic response of the nuclear tower is analyzed by investigating the frequency response during the main recorded events. The dynamic characteristics of the nuclear tower under seismic response with higher intensity are pointed out the dominant seismic time history components determines the response characteristics of the tower. The nuclear tower coupled with the seismic loadings will amplify the damages to the structure. These results are consistent with field observations after major seismic response, this explains the symmetry of the nuclear tower damage during seismic response. Seismic resistance measures, such as viscous damping or energy dissipation, dynamic properties and nuclear tower vibration elements will help to increase the accuracy of the life model. In this paper, improvement in using computing program and mathematical algorithms will increase both the accuracy and confidence of the results. The contact problem of the nuclear tower structure is another direction for a detailed understanding the mechanism of the nuclear tower structure interaction, such as mode shapes, eigenvalues/vectors, deformation, propagation and non-propagation of cracks, and the stresses slip of the foundation caused by random seismic loading that can lead to damage. This study is helpful for designing new seismic resistant nuclear towers structures to reduce damage.


Article
Experimental Study on the Effect of Temperature on the Fatigue Endurance Limit of Two AL Alloys
دراسة عملیة لبیان تأثیر درجة الحرارة على حد الكلال لسبیكتین من الالمنیوم

Authors: Sa’ad Abbas Al-Saraf
Pages: 1048-1057
Loading...
Loading...
Abstract

In this work , an experimental study to obtain the fatigue endurance limit for two aluminum alloy , 2024 and 5052 , were carried out at stress ratio R=-1 and rotary bending tests . The fatigue tests were performed at RT, 100 °C, 200 °C and 300 °C in order to establish the S–N curve equations. The fatigue endurance limits for both alloys at different temperature conditions were calculated at 107 cycles from the empirical S-N curve equations. It was found that the fatigue endurance limit decrease with increasing the temperature. Also the reduction percentage in fatigue endurance limit for 5052 Al. alloy was higher than that of 2024 Al. alloy.


Article
Effect of Temperature on Fatigue Transition life and Strength of Aluminum alloy
تأثیر درجة الحرارة على العمر الانتقالي الكلالي و المقاومة لسبیكة الالمنیوم

Loading...
Loading...
Abstract

Two different temperatures (room temperature and 200oC) were used in the experiments using 1100 Aluminum alloy in order to analyze the effect of temperature. Stress amplitude versus fatigue life (S-N curves) for two different temperatures was established experimentally. The transition lives (point) of those two curves were observed and no significant effect of temperature on this point was observed. Fatigue strength at a given number of cycles decreases with increasing temperature.

Keywords


Article
A Hybrid Neural Based Dynamic Branch Prediction Unit
وحدة ديناميكية هجينة للتنبؤ بالتفرعات باستخدام الشبكات العصبية

Authors: Gheni A. Ali
Pages: 1066-1081
Loading...
Loading...
Abstract

Modern high performance processor architectures have come to depend upon highly pipelined operation in order to achieve improvements in operating speed. As a result, the cost associated with flushing the pipeline and refilling it when a branch instruction is mis-predicted can significantly impact processor performance. Many schemes, from the extremely simple to the highly complex, have been proposed to improve branch prediction accuracy. Conventional two-level branch predictors predict the outcome of a branch either based on the( local branch history) information, comprising the previous outcomes of a single branch (intra-branch correlation), or based on the (global branch history) information, comprising the previous outcomes of all branches (inter-branch correlation). The misprediction rates for these predictors are very high when they predict branch instructions with hybrid correlations. In this paper we suggest a hybrid perceptron based predictor which employs up to 31-bits of both local and global branch history information to minimize the misprediction rates. The software written for simulation and testing shows that the suggested hybrid predictor achieves a high accuracy. Our results shows that the best response of the predictor is obtained on history length of 16- bits.


Article
Experimental Investigation of Heat Transfer and Pressure Drop in Square Metal Packed Duct with Different Boundary Heating
دراسة عملية لأنتقال الحرارة وفقدان الضغط في وسط مسامي معدني ذو مقطع مربع باختلاف حدود التسخين

Authors: Kifah H. Hilal
Pages: 1082-1107
Loading...
Loading...
Abstract

This paper presents experimental results of forced convection heat transfer and pressure drop across ( 12.5 * 12.5 * 100 cm ) square packed duct. The pad made of forty- eight metallic wrapping coil unit with (0.98 porosity ) and (26 W/m.°C thermal conductivity ). The local surface duct temperature and local heat transfer coefficient distribution, Nusselt number, pressure drop and friction factor were measured for heat flux (0.56 to 2.73 kW/m2) ,Reynolds number (40339 to 54797 ) and three boundary condition of heat flux imposed on duct surface . It was found that Nusselt number increases as Reynold number, heat flux and number of duct surface exposed to heat flux increases. Nusselt number in packed duct is to be ( 1.2 , 1.19 ) times higher than the empty ducts at heating all surface and top & bottom surface of packed duct respectively. Many empirical relation between Reynold number, Nusselt number and pressure drop obtained in this study.

Table of content: volume:30 issue:6