research centers


Search results: Found 2

Listing 1 - 2 of 2
Sort by

Article
EVALUATION OF AND COMPARISON THE GENERAL CORROSION BEHAVIOR OF LOCALLY PREPARED SULFAMIC, AT 298 K

Author: Lamy~a M. Dawood
Journal: AL-TAQANI مجلة التقني ISSN: 1818653X Year: 2005 Volume: 18 Issue: 2 Pages: E101-E106
Publisher: Foundation of technical education هيئة التعليم التقني

Loading...
Loading...
Abstract

The aim of this study is to investigate ,and compare the general corrosion behavior of the locally prepared sulfamic acid (HSO3NH2 ) . Three different alloys were used , commercially pure copper , AISI 1010 plain carbon steel , and AISI 316 Stainless steel Simple immersion test was performed on each of the above mentioned alloys, in two different concentrations of 5% , and 10% by weight( wt ) , 99% purity of locally prepared sulfamic acid of pH (0.4-_0.6 at ), 298K for 120 hr to evaluate corrosion rate by Mil per year (MPY) . For comparison purposes Annlar Sulfuric acid and Hydrochloric acid also were used at the same concentrations of 5%, and 10% by wt, at 298K using the same above mentioned alloys , for 120hr immersion duration. The tests indicates that the general corrosion rate for all the tested three alloys, in locally prepared sulfamic acid is far less ( Minimum MPY values) than that for HCl and H2SO4 , especially for commercially pure copper and AISI 1010 carbon steel. These results are related to the formation of complex water-soluble sulfamate salts for each alloy used during corrosion reaction. While the formation of precipitated corrosion product salt layers causes further corrosion on using each of H2SO4 or HCl acids.This means that sulfamic acid can be used to replace safely H2SO4 and Hcl acid whenever the tested alloys are found at the different industrial applications. For AISI 316SS. Alloy the MPY values are ( 0.1 MPY at 5% wt, and 0.15 value at 10% wt ) in locally prepared sulfamic acid although these values are lower than MPY values when immersing the same alloy is immersed in sulfuric acid . But still MPY values in sulfuric acid are fairly close. This means that sulfuric acid is still competitive to sulfamic acid on using alloy AISI 316SS.

لغرض تقييم السلوك ألتآكلي لبعض السبائك في حامض السلفاميك المحضر محليا تم استخدام ثلاث سبائك مختلفة هي النحاس ذو النقاوة التجارية ، الفولاذ الكربوني البسيط نوع AISI 1010 والفولاذ المقاوم للصدأ نـوع AISI 316 . تم إجراء اختبار الغمر البسيط في درجة حرارة 2 98 Kولمدة 5 أيام (120hr) في حامض السلفاميك المحضر محليا وبنقاوة قدرها 99% وبتركيزين مختلفين هما 5% و 10% وزنا بالتتابع لاستخراج معدل التآكل العام مقاسا بـ Mil/Year (MPY ) ولكل سبيكة وتركيز على حدة. علما أن الحامضية pH لهذا الحامض كانت مابين ( 0.4- 0.65 ). للمقارنة بين السلوك ألتآكلي لحامض السلفاميك المحضر محليا والحوامض الأخرى تم استخدام كل من حامض الكبريتيك H 2SO4 وحامض الهيدروكلوريك HCl القياسية Annlar ولنفس السبائك المستخدمة

Keywords


Article
Evaluation of Enamel Coatings General Corrosion in Sulphuric Acid Solution at Different Temperatures
تقييم مقاومة طلاءات المينا للتأكل العام في محلول حامض الكبريتيك وبدرجات حرارية مختلفة

Authors: Ibtihal Abdul Razak --- Lamy'a M. Dawood
Journal: Engineering and Technology Journal مجلة الهندسة والتكنولوجيا ISSN: 16816900 24120758 Year: 2005 Volume: 24 Issue: 8 Pages: 1097-1106
Publisher: University of Technology الجامعة التكنولوجية

Loading...
Loading...
Abstract

Listing 1 - 2 of 2
Sort by
Narrow your search

Resource type

article (2)


Language

English (2)


Year
From To Submit

2005 (2)